[PATCH 1/4] phy/micrel: disable Asym_Pause support

[Christian Hemp]

From: Jan Weitzel <j.weitzel at phytec.de>

With SUPPORTED_Asym_Pause enabled we need to hotplug the ethernet cable.
So disable it like done with PHY_ID_KSZ9021.

Signed-off-by: Jan Weitzel <j.weitzel at phytec.de>
Signed-off-by: Christian Hemp <c.hemp at phytec.de>
---
 drivers/net/phy/micrel.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 8aea653..88c64e5 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -254,11 +254,11 @@ static struct phy_driver ksphy_driver[] = {
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 }, {
+	/* I saw the same issue like PHY_ID_KSZ9021 for Asym_Pause */
 	.phy_id		= PHY_ID_KSZ9031,
 	.phy_id_mask	= 0x00fffff0,
 	.drv.name	= "Micrel KSZ9031 Gigabit PHY",
-	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
-				| SUPPORTED_Asym_Pause),
+	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
 	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-- 
1.7.0.4