[PATCH 9/9] Documentation: add MIPS Creator CI20 board mini-howto

[Antony Pavlov]

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
 Documentation/boards/mips/img-ci20.rst | 42 ++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/Documentation/boards/mips/img-ci20.rst b/Documentation/boards/mips/img-ci20.rst
new file mode 100644
index 0000000..8f5cd80
--- /dev/null
+++ b/Documentation/boards/mips/img-ci20.rst
@@ -0,0 +1,42 @@
+MIPS Creator CI20
+=================
+
+The MIPS Creator CI20 board is a high performance, fully featured
+Linux and Android development platform.
+
+Major hardware features include:
+
+  * Ingenic JZ4780 SoC (dual 1.2GHz MIPS32 processor);
+  * 1 GiB DDR3 memory;
+  * 8 GiB NAND Flash;
+  * 2 x UART;
+  * Davicom dm9000 10/100 Ethernet controller;
+  * 2 x USB (host and OTG);
+  * HDMI output;
+  * 14-pin ETAG connector;
+  * GPIO, SPI, I2C, ADC, expansion headers.
+
+
+The board uses U-Boot 2013.10 as bootloader.
+
+
+Running barebox
+---------------
+
+  1. Boot the board with UART0 serial console. Stop the auto boot during U-boot.
+
+  2. Upload ``zbarebox.bin`` via Ymodem to the board and then run:
+
+.. code-block:: none
+
+    ci20# loady 0xa8000000
+    ...
+    ci20# go 0xa8000000
+..
+
+
+Links
+-----
+
+  * http://store.imgtec.com/product/mips-creator-ci20
+  * http://elinux.org/MIPS_Creator_CI20
-- 
2.1.0