[RFC] ARM: dts: i.MX53: voipac: Provide NAND flash partition table

[Rostislav Lisovy]

Signed-off-by: Rostislav Lisovy <lisovy at gmail.com>
---
When compiled and loaded with the "imx-usb-loader" to RAM, the command
"saveenv" and "loadenv" do work properly (i.e. "loading environment
from /dev/nand0.environment.bb"). When I flash the barebox to the NAND
with the "barebox_update" command and reboot the device, the message
"environment load /dev/env0: No such file or directory" is provided
during boot. "saveenv" and "loadenv" do not know anything about
"/dev/nand0.environment.bb" anymore and try to access the "/dev/env0".
What am I doing wrong?


 arch/arm/dts/imx53-voipac-bsb.dts      |  1 +
 arch/arm/dts/imx53-voipac-dmm-668.dtsi | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi

diff --git a/arch/arm/dts/imx53-voipac-bsb.dts b/arch/arm/dts/imx53-voipac-bsb.dts
index 54c8bcd..12ce592 100644
--- a/arch/arm/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/dts/imx53-voipac-bsb.dts
@@ -10,4 +10,5 @@
  */
 
 #include <arm/imx53-voipac-bsb.dts>
+#include "imx53-voipac-dmm-668.dtsi"
 #include "imx53.dtsi"
diff --git a/arch/arm/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 0000000..dfff1c2
--- /dev/null
+++ b/arch/arm/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,33 @@
+/ {
+	chosen {
+		linux,stdout-path = &uart1;
+
+		environment at 0 {
+			compatible = "barebox,environment";
+			device-path = &nfc, "partname:environment";
+		};
+	};
+};
+
+&nfc {
+	partition at 0 {
+		label = "barebox";
+		reg = <0x0 0x80000>;
+	};
+
+	partition at 1 {
+		label = "environment";
+		reg = <0x80000 0x80000>;
+	};
+
+	partition at 2 {
+		label = "kernel";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition at 3 {
+		label = "rootfs";
+		reg = <0x500000 0x07B00000>;
+	};
+};
+
-- 
2.0.0.rc4