[PATCH] usb: ehci-hcd: Correct CLEAR_FEATURE code
Dmitry Voytik
voytikd at gmail.com
Thu Oct 16 05:52:20 PDT 2014
This commit broke USB on olinuxino board:
87b9bea USB: host: hub: Use usb_hub_power_on from U-Boot
This patch was ported from U-Boot with small changes. See discussion:
http://lists.denx.de/pipermail/u-boot/2013-May/153920.html
The root cause seems to be a missing mask and missing 'break' in
ehci-hcd.c. Fix both.
Signed-off-by: Dmitry Voytik <voytikd at gmail.com>
---
drivers/usb/host/ehci-hcd.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5624552..d2e1296 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -675,21 +675,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
+ reg &= ~EHCI_PS_CLEAR;
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg &= ~EHCI_PS_PE;
break;
case USB_PORT_FEAT_C_ENABLE:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
+ reg |= EHCI_PS_PEC;
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC(ehci_readl(&ehci->hccr->cr_hcsparams)))
- reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
+ reg &= ~ EHCI_PS_PP;
+ break;
case USB_PORT_FEAT_C_CONNECTION:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
+ reg |= EHCI_PS_CSC;
break;
case USB_PORT_FEAT_OVER_CURRENT:
- reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
+ reg |= EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
ehci->portreset &= ~(1 << le16_to_cpu(req->index));
--
1.9.1
More information about the barebox
mailing list