[PATCH] i2c: omap: fix dts property "clock-frequency" usage

Sascha Hauer s.hauer at pengutronix.de
Wed Oct 1 22:51:29 PDT 2014


On Wed, Oct 01, 2014 at 04:37:16PM +0200, Teresa Gámez wrote:
> Looking at the linux kernel the clock-frequency property of
> the device tree is used to set the bus speed and not the
> fclk_rate. Adapted this to be compliant with linux kernel.
> 
> Signed-off-by: Teresa Gámez <t.gamez at phytec.de>

Applied, thanks

Sascha

> ---
>  drivers/i2c/busses/i2c-omap.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index adc952b..48bdfbe 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -151,7 +151,6 @@ struct omap_i2c_struct {
>  	u8			reg_shift;
>  	struct omap_i2c_driver_data	*data;
>  	struct resource		*ioarea;
> -	u32			fclk_rate;
>  	u32			speed;		/* Speed of bus in Khz */
>  	u16			scheme;
>  	u16			cmd_err;
> @@ -421,7 +420,7 @@ static int omap_i2c_init(struct omap_i2c_struct *i2c_omap)
>  		internal_clk = 4000;
>  
>  	/* Compute prescaler divisor */
> -	psc = i2c_omap->fclk_rate / internal_clk;
> +	psc = i2c_data->fclk_rate / internal_clk;
>  	psc = psc - 1;
>  
>  	/* If configured for High Speed */
> @@ -1016,9 +1015,16 @@ i2c_omap_probe(struct device_d *pdev)
>  	i2c_omap->reg_shift = (i2c_data->flags >>
>  					OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
>  
> -	if (pdev->platform_data != NULL)
> +	if (pdev->platform_data != NULL) {
>  		speed = *(u32 *)pdev->platform_data;
> -	else
> +	} else {
> +		of_property_read_u32(pdev->device_node, "clock-frequency",
> +			&speed);
> +		/* convert DT freq value in Hz into kHz for speed */
> +		speed /= 1000;
> +	}
> +
> +	if (!speed)
>  		speed = 100;	/* Default speed */
>  
>  	i2c_omap->speed = speed;
> @@ -1080,12 +1086,6 @@ i2c_omap_probe(struct device_d *pdev)
>  			i2c_omap->b_hw = 1; /* Enable hardware fixes */
>  	}
>  
> -	i2c_omap->fclk_rate = i2c_data->fclk_rate;
> -
> -	if (!i2c_omap->fclk_rate)
> -		of_property_read_u32(pdev->device_node, "clock-frequency",
> -				&i2c_omap->fclk_rate);
> -
>  	/* reset ASAP, clearing any IRQs */
>  	omap_i2c_init(i2c_omap);
>  
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list