[PATCH 2/2] ARM: omap: Add bootsource serial to xload

[Sascha Hauer]

On Wed, Nov 12, 2014 at 10:24:48AM +0100, Jan Weitzel wrote:
> Am 12.11.2014 um 09:22 schrieb Sascha Hauer:
> >Hi Jan,
> >
> >On Wed, Nov 12, 2014 at 08:41:54AM +0100, Jan Weitzel wrote:
> >>If booted from serial via xmodem, also get barebox.bin per xmodem
> >>For first stage you need the .pblx file instead of MLO.
> >>
> >>Signed-off-by: Jan Weitzel <j.weitzel at phytec.de>
> >>---
> >>  arch/arm/mach-omap/Kconfig |  7 +++++++
> >>  arch/arm/mach-omap/xload.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
> >>  2 files changed, 53 insertions(+)
> >>
> >>diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
> >>index f9b5ec3..953dd8f 100644
> >>--- a/arch/arm/mach-omap/Kconfig
> >>+++ b/arch/arm/mach-omap/Kconfig
> >>@@ -118,6 +118,13 @@ config OMAP4_USBBOOT
> >>  	  You need the utility program omap4_usbboot to boot from USB.
> >>  	  Please read omap4_usb_booting.txt for more information.
> >>+config OMAP_SERIALBOOT
> >>+	bool
> >>+	default y
> >No default y please. Better keep it disabled by default because the
> >OMAP4 xload configs are quiet tight I think.
> 
> Is adding it to am335x_mlo_defconfig ok? Because of the size I added the
> ARCH_AM33XX dependency.

I overlooked this dependency. So the dependency is only because of the
binary size and it's otherwise usable on Omap aswell? In this case I
suggest to drop the dependency. And yes, ok to add it to the
am335x_mlo_defconfig.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |