[PATCH v2 01/11] ARM: add ARM946E-S CPU type

[Antony Pavlov]

ARM946E-S is used in the DIGIC family SoCs.

ARM946E-S core supports ARMv5TE and has Cache & MPU.
Linux kernel uses ARMv4 MPU cache routines for ARM946E-S core.
E.g. see linux.git/boot/compressed/head.S:

    .word   0x41009400              @ ARM94x
    .word   0xff00ff00
    W(b)    __armv4_mpu_cache_on
    W(b)    __armv4_mpu_cache_off
    W(b)    __armv4_mpu_cache_flush

So select CPU_32v4T for ARM946E-S despite of ARMv5TE support.

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
 arch/arm/cpu/Kconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index aed4cb7..fb1a999 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -39,6 +39,19 @@ config CPU_ARM926T
 	  Say Y if you want support for the ARM926T processor.
 	  Otherwise, say N.
 
+# ARM946E-S
+config CPU_ARM946E
+	bool
+	depends on !MMU
+	select CPU_32v4T
+	help
+	  ARM946E-S is a member of the ARM9E-S family of high-
+	  performance, 32-bit system-on-chip processor solutions.
+	  The TCM and ARMv5TE 32-bit instruction set is supported.
+
+	  Say Y if you want support for the ARM946E-S processor.
+	  Otherwise, say N.
+
 # Feroceon
 config CPU_FEROCEON
 	bool
-- 
2.0.1