[PATCH v2 7/7] USB: host: add xHCI PCI driver

[Sebastian Hesselbarth]

This adds a driver for PCI-attached xHCI controllers.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
To: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
Cc: barebox at lists.infradead.org
---
 drivers/usb/host/Kconfig    |  7 +++++++
 drivers/usb/host/Makefile   |  1 +
 drivers/usb/host/xhci-pci.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 53 insertions(+)
 create mode 100644 drivers/usb/host/xhci-pci.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8c64a3b99c11..c5dc2ea532c4 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -33,3 +33,10 @@ config USB_XHCI
 
 	  This driver currently only supports virtual USB 2.0 ports, if you
 	  plan to use USB 3.0 devices, use a USB 2.0 cable in between.
+
+config USB_XHCI_PCI
+	depends on PCI
+	select USB_XHCI
+	bool "PCI xHCI driver"
+	help
+	  Enables support for PCI attached xHCI controllers.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a5c009ebd6a8..0478d342720d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_USB_EHCI_ATMEL)	+= ehci-atmel.o
 obj-$(CONFIG_USB_OHCI)		+= ohci-hcd.o
 obj-$(CONFIG_USB_OHCI_AT91)	+= ohci-at91.o
 obj-$(CONFIG_USB_XHCI)		+= xhci-hcd.o xhci-hub.o
+obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
new file mode 100644
index 000000000000..a140b1dd07d3
--- /dev/null
+++ b/drivers/usb/host/xhci-pci.c
@@ -0,0 +1,45 @@
+/*
+ * PCI driver for xHCI controllers
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <linux/pci.h>
+#include <usb/xhci.h>
+
+static int xhci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct xhci_data data = {};
+
+	pci_enable_device(pdev);
+	pci_set_master(pdev);
+
+	data.regs = pci_iomap(pdev, 0);
+
+	return xhci_register(&pdev->dev, &data);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(xhci_pci_tbl) = {
+	/* handle any USB 3.0 xHCI controller */
+	{ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), },
+	{ },
+};
+
+static struct pci_driver xhci_pci_driver = {
+	.name = "xHCI PCI",
+	.id_table = xhci_pci_tbl,
+	.probe = xhci_pci_probe,
+};
+
+static int xhci_pci_init(void)
+{
+	return pci_register_driver(&xhci_pci_driver);
+}
+device_initcall(xhci_pci_init);
-- 
2.0.0