[PATCH 2/4] ARM: i.MX5: internal NAND update: Fix firmware start page for internal nand boot

[Sascha Hauer]

Documentation clearly states that the FCB at offset 0x68 has
to contain the start page of the firmware. In our case this
was set to 0x0. I don't know how this could ever work, but it
did, at least until:

15ee301 ARM: i.MX: bbu-internal: optionally use DCD data from image

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/mach-imx/imx-bbu-internal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-imx/imx-bbu-internal.c b/arch/arm/mach-imx/imx-bbu-internal.c
index ae981e8..a5cb7e7 100644
--- a/arch/arm/mach-imx/imx-bbu-internal.c
+++ b/arch/arm/mach-imx/imx-bbu-internal.c
@@ -202,6 +202,9 @@ static int imx_bbu_internal_v2_write_nand_dbbt(struct imx_internal_bbu_handler *
 	*ptr++ = FCB_MAGIC;	/* FCB */
 	*ptr++ = 1;		/* FCB version */
 
+	ptr = image + 0x68; /* Firmware start page */
+	*ptr = 12;
+
 	ptr = image + 0x78; /* DBBT start page */
 	*ptr = 4;
 
-- 
2.0.1