[PATCH 2/2] sama5d3x: HSMC NAND initialize TIMINGS and import values from U-Boot

[Matteo Fortini]

The configuration for NAND has been aligned with values
from U-Boot and completed with TIMINGS initialization

Signed-off-by: Matteo Fortini <matteo.fortini at gmail.com>
---
 arch/arm/boards/sama5d3xek/init.c | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c
index e078642..743197f 100644
--- a/arch/arm/boards/sama5d3xek/init.c
+++ b/arch/arm/boards/sama5d3xek/init.c
@@ -72,21 +72,30 @@ static struct atmel_nand_data nand_pdata = {
 };
 
 static struct sam9_smc_config cm_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
+	.ncs_read_setup		= 1,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 1,
+	.nwe_setup		= 2,
 
-	.ncs_read_pulse		= 6,
-	.nrd_pulse		= 4,
+	.ncs_read_pulse		= 5,
+	.nrd_pulse		= 3,
 	.ncs_write_pulse	= 5,
 	.nwe_pulse		= 3,
 
-	.read_cycle		= 6,
-	.write_cycle		= 5,
+	.read_cycle		= 8,
+	.write_cycle		= 8,
 
 	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 1,
+	.tdf_cycles		= 3,
+
+	.tclr			= 3,
+	.tadl			= 10,
+	.tar			= 3,
+	.ocms			= 0,
+	.trr			= 4,
+	.twb			= 5,
+	.rbnsel			= 3,
+	.nfsel			= 1
 };
 
 static void ek_add_device_nand(void)
@@ -102,7 +111,7 @@ static void ek_add_device_nand(void)
 		cm_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
 	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &cm_nand_smc_config);
+	sama5_smc_configure(0, 3, &cm_nand_smc_config);
 
 	at91_add_device_nand(&nand_pdata);
 }
-- 
2.0.1