[PATCH] ARM: i.MX: esdctl: i.MX53 has esdctl v4, not v3

[Sascha Hauer]

On the i.MX53 this has the effect that in early init only
half of the memory bank is detected and the barebox image
is place in the middle of SDRAM.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/mach-imx/esdctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/esdctl.c b/arch/arm/mach-imx/esdctl.c
index bb8fec2..811592f 100644
--- a/arch/arm/mach-imx/esdctl.c
+++ b/arch/arm/mach-imx/esdctl.c
@@ -549,9 +549,9 @@ void __naked __noreturn imx53_barebox_entry(void *boarddata)
 	unsigned long base, size;
 
 	upper_or_coalesced_range(MX53_CSD0_BASE_ADDR,
-			imx_v3_sdram_size((void *)MX53_ESDCTL_BASE_ADDR, 0),
+			imx_v4_sdram_size((void *)MX53_ESDCTL_BASE_ADDR, 0),
 			MX53_CSD1_BASE_ADDR,
-			imx_v3_sdram_size((void *)MX53_ESDCTL_BASE_ADDR, 1),
+			imx_v4_sdram_size((void *)MX53_ESDCTL_BASE_ADDR, 1),
 			&base, &size);
 
 	barebox_arm_entry(base, size, boarddata);
-- 
2.0.1