[PATCH] Documentation: add virt2real barebox mini-howto
Antony Pavlov
antonynpavlov at gmail.com
Fri Jul 11 13:26:22 PDT 2014
Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
Documentation/boards/davinci.rst | 51 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/boards/davinci.rst
diff --git a/Documentation/boards/davinci.rst b/Documentation/boards/davinci.rst
new file mode 100644
index 0000000..a2ddc3c
--- /dev/null
+++ b/Documentation/boards/davinci.rst
@@ -0,0 +1,51 @@
+TI Davinci
+==========
+
+virt2real
+---------
+
+virt2real is a miniature board for creation of WiFi
+or Internet controllable smart devices.
+
+The board has
+
+ * TI DaVinchi DM365 running at 300 MHz;
+ * 128 MiB DDR2 SDRAM;
+ * 256 MiB NAND Flash Memory;
+ * 2 x UART serial interfaces;
+ * 1 x Ethernet interface (Micrel KS8851);
+ * 1 x USB interface;
+ * microSD card slot.
+
+The board uses U-Boot as bootloader.
+
+
+Running barebox
+^^^^^^^^^^^^^^^
+
+ 1. Connect to the boards's UART0 (115200 8N1);
+ Use J2.2 (GND), J2.4 (UART0_TXD), J2.6 (UART0_RXD) pins.
+
+ 2. Turn board's power on;
+
+ 3. Wait for ``Hit any key to stop autoboot`` prompt and press the space key.
+
+ 4. Upload ``barebox.bin`` via Ymodem
+
+.. code-block:: none
+ virt2real ># loady
+..
+
+ 5. Run barebox
+
+.. code-block:: none
+ virt2real ># go 0x82000000
+..
+
+
+Links
+^^^^^
+
+ * http://virt2real.com/
+ * http://wiki.virt2real.ru/
+ * https://github.com/virt2real
--
2.0.1
More information about the barebox
mailing list