[PATCH] Documentation: add uemd mb7707 barebox mini-howto

[Sascha Hauer]

On Wed, Jul 09, 2014 at 12:22:56AM +0400, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>

Applied, thanks

Sascha

> ---
>  Documentation/boards/uemd.rst | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/boards/uemd.rst
> 
> diff --git a/Documentation/boards/uemd.rst b/Documentation/boards/uemd.rst
> new file mode 100644
> index 0000000..4fb30fa
> --- /dev/null
> +++ b/Documentation/boards/uemd.rst
> @@ -0,0 +1,40 @@
> +UEMD
> +====
> +
> +MB 77.07
> +--------
> +
> +MB 77.07 board uses MBOOT as bootloader.
> +MBOOT is a U-Boot clone with reduced functionality.
> +See https://github.com/RC-MODULE/mboot for details.
> +
> +Running barebox
> +^^^^^^^^^^^^^^^
> +
> +  1. Connect to the boards's UART (38400 8N1);
> +
> +  2. Turn board's power on;
> +
> +  3. Wait ``Hit any key (in 2 sec) to skip autoload...`` prompt and press the space key;
> +
> +  4. Compile ``zbarebox.bin`` image and upload it to the board via tftp
> +
> +.. code-block:: none
> +
> +  MBOOT # tftpboot zbarebox.bin
> +  greth: greth_halt
> +  TFTP Using GRETH_10/100 device
> +  TFTP params: server 192.168.0.1 our_ip 192.168.0.7
> +  TFTP params: filename 'zbarebox.bin' load_address 0x40100000
> +  TFTP Loading: ################
> +  TFTP done
> +
> +..
> +
> +  5. Run barebox
> +
> +.. code-block:: none
> +
> +  MBOOT # go 0x40100000
> +
> +..
> -- 
> 2.0.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |