[PATCH 2/5] ARM: i.MX: edmqmx6: correct MMDC init

[Lucas Stach]

From: Philipp Zabel <p.zabel at pengutronix.de>

This is a squashed commit of the following downstream
commits:
- Set CS0_END in MMDC0_MDASP to 32Gb (4GB)T
- Fix writes to MMDC0_MDSCR
- Enable bank interleaving (BI_ON) and set write
  additional latency (WALAT) to 1 cycle in MMDC0_MDMISC
- Set ARCR_DYN_JMP=1 and ARCR_DYN_MAX=15 in MMDC0_MAARCR

Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm/boards/datamodul-edm-qmx6/lowlevel.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c b/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c
index 33e0152bc743..81b6ac4cbe0a 100644
--- a/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c
+++ b/arch/arm/boards/datamodul-edm-qmx6/lowlevel.c
@@ -99,24 +99,19 @@ static void sdram_init(void)
 	writel(0x8A8F7934, 0x021b000c);
 	writel(0xDB568E65, 0x021b0010);
 	writel(0x01FF00DB, 0x021b0014);
-	writel(0x00000740, 0x021b0018);
+	writel(0x00011740, 0x021b0018);
 	writel(0x00008000, 0x021b001c);
 	writel(0x000026d2, 0x021b002c);
 	writel(0x008F0E21, 0x021b0030);
-	writel(0x00000047, 0x021b0040);
-	writel(0x11420000, 0x021b0400);
+	writel(0x0000007f, 0x021b0040);
+	writel(0x114201f0, 0x021b0400);
 	writel(0x11420000, 0x021b4400);
 	writel(0x841A0000, 0x021b0000);
 	writel(0x04108032, 0x021b001c);
-	writel(0x00008033, 0x021b001c);
+	writel(0x00028033, 0x021b001c);
 	writel(0x00048031, 0x021b001c);
 	writel(0x09308030, 0x021b001c);
 	writel(0x04008040, 0x021b001c);
-	writel(0x0410803A, 0x021b001c);
-	writel(0x0000803B, 0x021b001c);
-	writel(0x00048039, 0x021b001c);
-	writel(0x09308038, 0x021b001c);
-	writel(0x04008048, 0x021b001c);
 	writel(0x00005800, 0x021b0020);
 	writel(0x00011117, 0x021b0818);
 	writel(0x00011117, 0x021b4818);
-- 
1.8.5.3