[PATCH] ARM: i.MX: Karo-tx25: build image for internal boot

[Sascha Hauer]

This adds an image for the TX25 in internal boot mode. This can
be used for USB booting.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 images/Makefile.imx | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/images/Makefile.imx b/images/Makefile.imx
index e3b27b7..d44c63c 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -14,6 +14,11 @@ pblx-$(CONFIG_MACH_TX25) += start_imx25_karo_tx25
 FILE_barebox-karo-tx25.img = start_imx25_karo_tx25.pblx
 image-$(CONFIG_MACH_TX25) += barebox-karo-tx25.img
 
+pblx-$(CONFIG_MACH_TX25) += start_imx25_karo_tx25
+CFG_start_imx25_karo_tx25.pblx.imximg = $(board)/karo-tx25/flash-header-tx25.imxcfg
+FILE_barebox-karo-tx25-internal.img = start_imx25_karo_tx25.pblx.imximg
+image-$(CONFIG_MACH_TX25) += barebox-karo-tx25-internal.img
+
 # ----------------------- i.MX51 based boards ---------------------------
 pblx-$(CONFIG_MACH_FREESCALE_MX51_PDK) += start_imx51_babbage
 CFG_start_imx51_babbage.pblx.imximg = $(board)/freescale-mx51-babbage/flash-header-imx51-babbage.imxcfg
-- 
1.8.5.3