[PATCH 5/7] ARM: mx53-qsrb: enable USB OTG in host mode

[Eric Bénard]

Le Mon, 10 Feb 2014 09:31:48 +0100,
Sascha Hauer <s.hauer at pengutronix.de> a écrit :

> On Mon, Feb 10, 2014 at 09:28:54AM +0100, Eric Bénard wrote:
> > Hi Sascha,
> > 
> > Le Mon, 10 Feb 2014 09:16:17 +0100,
> > Sascha Hauer <s.hauer at pengutronix.de> a écrit :
> > > On Sat, Feb 08, 2014 at 03:16:10PM +0100, Eric Bénard wrote:
> > > >  &usbotg {
> > > > -       status = "okay";
> > > > +	phy_type = "utmi";
> > > > +	dr_mode = "host";
> > > > +	status = "okay";
> > > >  };
> > > 
> > > Do we need a barebox specific option to specify dr_mode? I mean barebox
> > > cannot do otg, so we need to specify dr_mode to host or device, but with
> > > the above change Linux is limited to host mode aswell.
> > > 
> > in chipidea-imx.c there is :
> > 
> > 	mode = of_usb_get_dr_mode(ci->dev->device_node, NULL);
> > 
> > 	switch (mode) {
> > 	case USB_DR_MODE_HOST:
> > 	default:
> > 		ci->mode = IMX_USB_MODE_HOST;
> > 		break;
> > 	case USB_DR_MODE_PERIPHERAL:
> > 		ci->mode = IMX_USB_MODE_DEVICE;
> > 		break;
> > 	}
> > 
> > so we could omit the dr_mode=host as it will default to host.
> 
> Then let's do this. The default-to-host beahaviour in barebox may not
> be desirable in all cases, but at least we do not propagate this
> behaviour to the kernel.
> 
do you want a v2 or will you remove the line when applying ?

Eric