[PATCH 1/7] sata-imx: i.MX53, use the internal 120MHz clock by default

[Eric Bénard]

this allows SATA to work on i.MX53 QSB-R :
barebox at Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link ok
imx-sata 10000000.sata: port 0: Spinning up device...
imx-sata 10000000.sata: port 0: ok.
ata0: registered /dev/ata0

before this fix the log was :
barebox at Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link timeout
set parameter: Connection timed out

Signed-off-by: Eric Bénard <eric at eukrea.com>
---
 drivers/ata/sata-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/sata-imx.c b/drivers/ata/sata-imx.c
index b7bd110..450cf4f 100644
--- a/drivers/ata/sata-imx.c
+++ b/drivers/ata/sata-imx.c
@@ -59,7 +59,7 @@ static int imx53_sata_init(struct imx_ahci *imx_ahci)
 	 */
 	val = readl(base + 0x180c);
 	val &= (0x3 << 1);
-	val |= (0x1 << 1);
+	val |= (0x2 << 1);
 	writel(val, base + 0x180c);
 
 	return 0;
-- 
1.8.3.1