[PATCH 3/3] netconsole: fix Documentation

[Sascha Hauer]

From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

since
commit 8eacfa71abcba857ab9aa1dcad49e2ba7d83406b
Refs: v2014.07.0-156-g8eacfa7
Author:     Sascha Hauer <s.hauer at pengutronix.de>

the netconsole device have a static device name 'netconsole'

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 Documentation/user/networking.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/user/networking.rst b/Documentation/user/networking.rst
index 6802138..6eeb93d 100644
--- a/Documentation/user/networking.rst
+++ b/Documentation/user/networking.rst
@@ -61,15 +61,15 @@ Network console
 barebox has a UDP-based network console. If enabled in the config, you will see
 something like this during startup::
 
-  registered netconsole as cs1
+  registered netconsole as netconsole
 
 By default the network console is disabled during runtime to prevent security
 risks. It can be enabled using:
 
 .. code-block:: sh
 
-  cs1.ip=192.168.23.2
-  cs1.active=ioe
+  netconsole.ip=192.168.23.2
+  netconsole.active=ioe
 
 This will send UDP packets to 192.168.23.2 on port 6666. On 192.168.23.2 the
 scripts/netconsole script can be used to control barebox:
-- 
2.1.3