Logical partition on barebox

Victorien Vedrine victorien.vedrine at ophrys.net
Thu Dec 11 02:44:10 PST 2014


Thanks for your answer.
In a first time, I used a barebox version with the last update at the 
10/16/2013. I Found the patch which you are talking about and I update 
barebox to the version of yesterday and I have the same problem.
The partitions of my SD card are this one (with fdisk) :

    Périphérique Amorçage  Début         Fin      Blocs Id. Système
    /dev/sdg1            2048        6143        2048   53  OnTrack DM6 Aux3
    /dev/sdg2            6144       10239        2048   10  OPUS
    /dev/sdg3           10240       43007       16384    6  FAT16
    /dev/sdg4           43008    15556607     7756800    5  Étendue
    /dev/sdg5           43040      567327      262144   83  Linux
    /dev/sdg6          567360    15556607     7494624    b  W95 FAT32

I use an iMX28 processor and I have this line on device_init fonction to 
add the SD card :

         add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0x2000,
                    IORESOURCE_MEM, &mci_pdata);

Is there any tests that I can do to find a solution or more informations 
for a bug ?

Best regards

Victorien

Le 11/12/2014 08:04, Sascha Hauer a écrit :
> Hi Victorien,
>
> On Wed, Dec 10, 2014 at 05:21:09PM +0100, Victorien Vedrine wrote:
>> Hi,
>> I'm developping a board with barebox and Linux. For my application,
>> I need 5 partition on my SD card (3 primary and 2 logical).
>> On barebox prompt, I just see the 3 primary partitions
>> (/dev/disk0.0, /dev/disk0.1, /dev/disk0.2) and 1 extended partition
>> (/dev/disk0.3). Is there a way to see the 2 logical partitions ?
> Which barebox version do you use?
>
> barebox supports extended partitions since:
>
> | commit 6fecd2aaca209884a0ec1f58ccc42b91d1d4b828
> | Author: Uwe Kleine-König<u.kleine-koenig at pengutronix.de>
> | Date:   Fri Nov 8 11:13:41 2013 +0100
> |
> |     partitions: dos: parse extended partition
> |
> |     DOS MBRs might contain an extended partition that holds several logical
> |     partitions. Add these to the partitions of the block device.
> |
> |     Signed-off-by: Uwe Kleine-König<u.kleine-koenig at pengutronix.de>
> |     Signed-off-by: Sascha Hauer<s.hauer at pengutronix.de>
>
> If your version is newer then this seems to be a bug.
>
> Sascha
>




More information about the barebox mailing list