[PATCH 0/2] mvebu: Openblocks A6 board support
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Tue Aug 26 07:17:36 PDT 2014
On 08/23/2014 10:19 PM, Ezequiel Garcia wrote:
> This two-piece patchset adds support for Plat'home's Openblocks A6 board [1].
> To make it a little more interesting, NAND support (ported from Linux) is
> included.
>
> Let's hope we can see USB and SATA soon!
I have postponed USB(-PHY) until Antoine gets his Chipidea gen-phy
patches through on LKML. When that is done, I plan to add a CI-stub
and PHY drivers for barebox and moving MVEBU USB over to CI in Linux.
I haven't thought about SATA but the controller is AHCI-compatible.
All we need is a stub for the controller, PHY drivers for KW+Dove,
and PHY drivers including SERDES setup for Armada 370/XP. I can have
a look at it as I already took SERDES setup apart for PCIe.
Sebastian
>
> [1] http://openblocks.plathome.com/products/a6/
>
> Ezequiel Garcia (2):
> nand: Add Marvell Orion NAND driver
> ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support
>
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/plathome-openblocks-a6/Makefile | 2 +
> arch/arm/boards/plathome-openblocks-a6/board.c | 1 +
> arch/arm/boards/plathome-openblocks-a6/lowlevel.c | 32 +++++
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/kirkwood-openblocks_a6-bb.dts | 13 ++
> arch/arm/mach-mvebu/Kconfig | 3 +
> drivers/mtd/nand/Kconfig | 7 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/nand_orion.c | 162 ++++++++++++++++++++++
> images/Makefile.mvebu | 11 ++
> 11 files changed, 234 insertions(+)
> create mode 100644 arch/arm/boards/plathome-openblocks-a6/Makefile
> create mode 100644 arch/arm/boards/plathome-openblocks-a6/board.c
> create mode 100644 arch/arm/boards/plathome-openblocks-a6/lowlevel.c
> create mode 100644 arch/arm/dts/kirkwood-openblocks_a6-bb.dts
> create mode 100644 drivers/mtd/nand/nand_orion.c
>
More information about the barebox
mailing list