[PATCH 0/2] mvebu: Openblocks A6 board support

[Ezequiel Garcia]

Hello everyone,

This two-piece patchset adds support for Plat'home's Openblocks A6 board [1].
To make it a little more interesting, NAND support (ported from Linux) is
included.

Let's hope we can see USB and SATA soon!

[1] http://openblocks.plathome.com/products/a6/

Ezequiel Garcia (2):
  nand: Add Marvell Orion NAND driver
  ARM: mvebu: Add Plathome Kirkwood Openblocks A6 board support

 arch/arm/boards/Makefile                          |   1 +
 arch/arm/boards/plathome-openblocks-a6/Makefile   |   2 +
 arch/arm/boards/plathome-openblocks-a6/board.c    |   1 +
 arch/arm/boards/plathome-openblocks-a6/lowlevel.c |  32 +++++
 arch/arm/dts/Makefile                             |   1 +
 arch/arm/dts/kirkwood-openblocks_a6-bb.dts        |  13 ++
 arch/arm/mach-mvebu/Kconfig                       |   3 +
 drivers/mtd/nand/Kconfig                          |   7 +
 drivers/mtd/nand/Makefile                         |   1 +
 drivers/mtd/nand/nand_orion.c                     | 162 ++++++++++++++++++++++
 images/Makefile.mvebu                             |  11 ++
 11 files changed, 234 insertions(+)
 create mode 100644 arch/arm/boards/plathome-openblocks-a6/Makefile
 create mode 100644 arch/arm/boards/plathome-openblocks-a6/board.c
 create mode 100644 arch/arm/boards/plathome-openblocks-a6/lowlevel.c
 create mode 100644 arch/arm/dts/kirkwood-openblocks_a6-bb.dts
 create mode 100644 drivers/mtd/nand/nand_orion.c

-- 
2.0.1