[PATCH 4/6] openrisc: dts: import or1ksim.dts from linux-3.16

[Antony Pavlov]

There are some minor changes with original linux-3.16 file:

  * the 'model' attribute is added (it used for barebox banner board name);
  * all "opencores,*-rtlsvn*" 'compatible' attribute values are dropped;
    these values are not actually used in the device drivers.

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
Cc: Franck Jullien <franck.jullien at gmail.com>
---
 arch/openrisc/dts/or1ksim.dts | 51 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/arch/openrisc/dts/or1ksim.dts b/arch/openrisc/dts/or1ksim.dts
new file mode 100644
index 0000000..7316cc6
--- /dev/null
+++ b/arch/openrisc/dts/or1ksim.dts
@@ -0,0 +1,51 @@
+/dts-v1/;
+/ {
+	model = "or1ksim";
+	compatible = "opencores,or1ksim";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "console=uart,mmio,0x90000000,115200";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu at 0 {
+			compatible = "opencores,or1200-rtlsvn481";
+			reg = <0>;
+			clock-frequency = <20000000>;
+		};
+	};
+
+	/*
+	 * OR1K PIC is built into CPU and accessed via special purpose
+	 * registers.  It is not addressable and, hence, has no 'reg'
+	 * property.
+	 */
+	pic: pic {
+		compatible = "opencores,or1k-pic";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	serial0: serial at 90000000 {
+		compatible = "ns16550a";
+		reg = <0x90000000 0x100>;
+		interrupts = <2>;
+		clock-frequency = <50000000>;
+	};
+
+	enet0: ethoc at 92000000 {
+		compatible = "opencores,ethoc";
+		reg = <0x92000000 0x100>;
+		interrupts = <4>;
+	};
+};
-- 
2.0.1