[PATCH 09/12] ARM: i.MX27: Use upstream dtsi file
Sascha Hauer
s.hauer at pengutronix.de
Mon Apr 28 00:45:58 PDT 2014
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/dts/imx27.dtsi | 553 +-----------------------------------------------
1 file changed, 1 insertion(+), 552 deletions(-)
diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi
index 83a8247..49a0ddf 100644
--- a/arch/arm/dts/imx27.dtsi
+++ b/arch/arm/dts/imx27.dtsi
@@ -8,555 +8,4 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-
-#include "skeleton.dtsi"
-#include "imx27-pinfunc.h"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- aliases {
- ethernet0 = &fec;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- spi0 = &cspi1;
- spi1 = &cspi2;
- spi2 = &cspi3;
- };
-
- aitc: aitc-interrupt-controller at e0000000 {
- compatible = "fsl,imx27-aitc", "fsl,avic";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x10040000 0x1000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- osc26m {
- compatible = "fsl,imx-osc26m", "fixed-clock";
- clock-frequency = <26000000>;
- };
- };
-
- cpus {
- #size-cells = <0>;
- #address-cells = <1>;
-
- cpu: cpu at 0 {
- device_type = "cpu";
- compatible = "arm,arm926ej-s";
- operating-points = <
- /* kHz uV */
- 266000 1300000
- 399000 1450000
- >;
- clock-latency = <62500>;
- clocks = <&clks 18>;
- voltage-tolerance = <5>;
- };
- };
-
- usbphy {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbphy0: usbphy at 0 {
- compatible = "usb-nop-xceiv";
- reg = <0>;
- clocks = <&clks 75>;
- clock-names = "main_clk";
- };
-
- usbphy2: usbphy at 2 {
- compatible = "usb-nop-xceiv";
- reg = <2>;
- clocks = <&clks 75>;
- clock-names = "main_clk";
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&aitc>;
- ranges;
-
- aipi at 10000000 { /* AIPI1 */
- compatible = "fsl,aipi-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x10000000 0x20000>;
- ranges;
-
- dma: dma at 10001000 {
- compatible = "fsl,imx27-dma";
- reg = <0x10001000 0x1000>;
- interrupts = <32>;
- clocks = <&clks 50>, <&clks 70>;
- clock-names = "ipg", "ahb";
- #dma-cells = <1>;
- #dma-channels = <16>;
- };
-
- wdog: wdog at 10002000 {
- compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
- reg = <0x10002000 0x1000>;
- interrupts = <27>;
- clocks = <&clks 74>;
- };
-
- gpt1: timer at 10003000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10003000 0x1000>;
- interrupts = <26>;
- clocks = <&clks 46>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- gpt2: timer at 10004000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10004000 0x1000>;
- interrupts = <25>;
- clocks = <&clks 45>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- gpt3: timer at 10005000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10005000 0x1000>;
- interrupts = <24>;
- clocks = <&clks 44>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- pwm: pwm at 10006000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx27-pwm";
- reg = <0x10006000 0x1000>;
- interrupts = <23>;
- clocks = <&clks 34>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- kpp: kpp at 10008000 {
- compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
- reg = <0x10008000 0x1000>;
- interrupts = <21>;
- clocks = <&clks 37>;
- status = "disabled";
- };
-
- owire: owire at 10009000 {
- compatible = "fsl,imx27-owire", "fsl,imx21-owire";
- reg = <0x10009000 0x1000>;
- clocks = <&clks 35>;
- status = "disabled";
- };
-
- uart1: serial at 1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks 81>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart2: serial at 1000b000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000b000 0x1000>;
- interrupts = <19>;
- clocks = <&clks 80>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart3: serial at 1000c000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000c000 0x1000>;
- interrupts = <18>;
- clocks = <&clks 79>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart4: serial at 1000d000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000d000 0x1000>;
- interrupts = <17>;
- clocks = <&clks 78>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- cspi1: cspi at 1000e000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-cspi";
- reg = <0x1000e000 0x1000>;
- interrupts = <16>;
- clocks = <&clks 53>, <&clks 60>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- cspi2: cspi at 1000f000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-cspi";
- reg = <0x1000f000 0x1000>;
- interrupts = <15>;
- clocks = <&clks 52>, <&clks 60>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- ssi1: ssi at 10010000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
- reg = <0x10010000 0x1000>;
- interrupts = <14>;
- clocks = <&clks 26>;
- dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
- dma-names = "rx0", "tx0", "rx1", "tx1";
- fsl,fifo-depth = <8>;
- status = "disabled";
- };
-
- ssi2: ssi at 10011000 {
- #sound-dai-cells = <0>;
- compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
- reg = <0x10011000 0x1000>;
- interrupts = <13>;
- clocks = <&clks 25>;
- dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
- dma-names = "rx0", "tx0", "rx1", "tx1";
- fsl,fifo-depth = <8>;
- status = "disabled";
- };
-
- i2c1: i2c at 10012000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
- reg = <0x10012000 0x1000>;
- interrupts = <12>;
- clocks = <&clks 40>;
- status = "disabled";
- };
-
- sdhci1: sdhci at 10013000 {
- compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
- reg = <0x10013000 0x1000>;
- interrupts = <11>;
- clocks = <&clks 30>, <&clks 60>;
- clock-names = "ipg", "per";
- dmas = <&dma 7>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- sdhci2: sdhci at 10014000 {
- compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
- reg = <0x10014000 0x1000>;
- interrupts = <10>;
- clocks = <&clks 29>, <&clks 60>;
- clock-names = "ipg", "per";
- dmas = <&dma 6>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- iomuxc: iomuxc at 10015000 {
- compatible = "fsl,imx27-iomuxc";
- reg = <0x10015000 0x600>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio1: gpio at 10015000 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015000 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio at 10015100 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015100 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio at 10015200 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015200 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio at 10015300 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015300 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio at 10015400 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015400 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio at 10015500 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015500 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- audmux: audmux at 10016000 {
- compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
- reg = <0x10016000 0x1000>;
- clocks = <&clks 0>;
- clock-names = "audmux";
- status = "disabled";
- };
-
- cspi3: cspi at 10017000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-cspi";
- reg = <0x10017000 0x1000>;
- interrupts = <6>;
- clocks = <&clks 51>, <&clks 60>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- gpt4: timer at 10019000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x10019000 0x1000>;
- interrupts = <4>;
- clocks = <&clks 43>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- gpt5: timer at 1001a000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x1001a000 0x1000>;
- interrupts = <3>;
- clocks = <&clks 42>, <&clks 61>;
- clock-names = "ipg", "per";
- };
-
- uart5: serial at 1001b000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1001b000 0x1000>;
- interrupts = <49>;
- clocks = <&clks 77>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart6: serial at 1001c000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1001c000 0x1000>;
- interrupts = <48>;
- clocks = <&clks 78>, <&clks 61>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- i2c2: i2c at 1001d000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
- reg = <0x1001d000 0x1000>;
- interrupts = <1>;
- clocks = <&clks 39>;
- status = "disabled";
- };
-
- sdhci3: sdhci at 1001e000 {
- compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
- reg = <0x1001e000 0x1000>;
- interrupts = <9>;
- clocks = <&clks 28>, <&clks 60>;
- clock-names = "ipg", "per";
- dmas = <&dma 36>;
- dma-names = "rx-tx";
- status = "disabled";
- };
-
- gpt6: timer at 1001f000 {
- compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
- reg = <0x1001f000 0x1000>;
- interrupts = <2>;
- clocks = <&clks 41>, <&clks 61>;
- clock-names = "ipg", "per";
- };
- };
-
- aipi at 10020000 { /* AIPI2 */
- compatible = "fsl,aipi-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x10020000 0x20000>;
- ranges;
-
- fb: fb at 10021000 {
- compatible = "fsl,imx27-fb", "fsl,imx21-fb";
- interrupts = <61>;
- reg = <0x10021000 0x1000>;
- clocks = <&clks 36>, <&clks 65>, <&clks 59>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- coda: coda at 10023000 {
- compatible = "fsl,imx27-vpu";
- reg = <0x10023000 0x0200>;
- interrupts = <53>;
- clocks = <&clks 57>, <&clks 66>;
- clock-names = "per", "ahb";
- iram = <&iram>;
- };
-
- usbotg: usb at 10024000 {
- compatible = "fsl,imx27-usb";
- reg = <0x10024000 0x200>;
- interrupts = <56>;
- clocks = <&clks 15>;
- fsl,usbmisc = <&usbmisc 0>;
- fsl,usbphy = <&usbphy0>;
- status = "disabled";
- };
-
- usbh1: usb at 10024200 {
- compatible = "fsl,imx27-usb";
- reg = <0x10024200 0x200>;
- interrupts = <54>;
- clocks = <&clks 15>;
- fsl,usbmisc = <&usbmisc 1>;
- status = "disabled";
- };
-
- usbh2: usb at 10024400 {
- compatible = "fsl,imx27-usb";
- reg = <0x10024400 0x200>;
- interrupts = <55>;
- clocks = <&clks 15>;
- fsl,usbmisc = <&usbmisc 2>;
- fsl,usbphy = <&usbphy2>;
- status = "disabled";
- };
-
- usbmisc: usbmisc at 10024600 {
- #index-cells = <1>;
- compatible = "fsl,imx27-usbmisc";
- reg = <0x10024600 0x200>;
- clocks = <&clks 62>;
- };
-
- sahara2: sahara at 10025000 {
- compatible = "fsl,imx27-sahara";
- reg = <0x10025000 0x1000>;
- interrupts = <59>;
- clocks = <&clks 32>, <&clks 64>;
- clock-names = "ipg", "ahb";
- };
-
- clks: ccm at 10027000{
- compatible = "fsl,imx27-ccm";
- reg = <0x10027000 0x1000>;
- #clock-cells = <1>;
- };
-
- iim: iim at 10028000 {
- compatible = "fsl,imx27-iim";
- reg = <0x10028000 0x1000>;
- interrupts = <62>;
- clocks = <&clks 38>;
- };
-
- fec: ethernet at 1002b000 {
- compatible = "fsl,imx27-fec";
- reg = <0x1002b000 0x4000>;
- interrupts = <50>;
- clocks = <&clks 48>, <&clks 67>;
- clock-names = "ipg", "ahb";
- status = "disabled";
- };
- };
-
- nfc: nand at d8000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,imx27-nand";
- reg = <0xd8000000 0x1000>;
- interrupts = <29>;
- clocks = <&clks 54>;
- status = "disabled";
- };
-
- weim: weim at d8002000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,imx27-weim";
- reg = <0xd8002000 0x1000>;
- clocks = <&clks 0>;
- ranges = <
- 0 0 0xc0000000 0x08000000
- 1 0 0xc8000000 0x08000000
- 2 0 0xd0000000 0x02000000
- 3 0 0xd2000000 0x02000000
- 4 0 0xd4000000 0x02000000
- 5 0 0xd6000000 0x02000000
- >;
- status = "disabled";
- };
-
- iram: iram at ffff4c00 {
- compatible = "mmio-sram";
- reg = <0xffff4c00 0xb400>;
- };
- };
-};
+#include <arm/imx27.dtsi>
--
1.9.1
More information about the barebox
mailing list