[PATCH 3/3] x86: ns16550: Rework driver to allow for x86 I/O space
Michel Stam
michel at reverze.net
Fri Apr 4 09:52:46 PDT 2014
Hello Antony,
Sorry to hear that- the patch was not meant to add new functionality, merely preserve the status quo in master.
To explain; add_ns16550_device() assumes that all ns16550 chips are mapped into memory. This is not so on the x86 platform. Previously, because no io-mapped resources were available, x86 created a "memory" device with custom IO routines. I rewrote this to use IORESOURCE_IO instead, but to do this, the invocation of the add_ns16550_device() needed to specify the resource type. The patch which conflicts with your patch can be undone as far as I'm concerned; I wasn't adding anything new to the mips/mach-xburst platform. I can redo the patch, leaving the file targeted by your patch unchanged if you like?
Regards,
Michel Stam
> On 4 apr. 2014, at 17:56, Antony Pavlov <antonynpavlov at gmail.com> wrote:
>
> On Fri, 4 Apr 2014 15:41:39 +0200
> michel at reverze.net wrote:
>
>> From: Michel Stam <m.stam at fugro.nl>
>>
>> The current implementation fakes a memory-mapped I/O device
>> at 0x3f8 and 0x2f8, then uses platform read/write functions
>> to do the actual reading and writing. These platform functions
>> only exist for the x86 platform; better to move the I/O
>> routines into the driver and have the driver request I/O ports
>> using request_ioport_region.
>> ---
>> arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 2 +-
>> arch/arm/mach-mvebu/armada-370-xp.c | 3 +-
>> arch/arm/mach-mvebu/kirkwood.c | 3 +-
>> arch/arm/mach-socfpga/xload.c | 4 +-
>> arch/arm/mach-tegra/tegra20.c | 2 +-
>> arch/mips/boards/dlink-dir-320/serial.c | 2 +-
>> arch/mips/boards/loongson-ls1b/serial.c | 2 +-
>> arch/mips/mach-ar231x/ar231x.c | 2 +-
>> arch/mips/mach-xburst/serial.c | 60 ++++++++++
> hmmm
> this partly revert my recent commit in the 'next' branch:
>
> commit 8f5d37835d44d07460d92307f0b6489048a18fba
> Author: Antony Pavlov <antonynpavlov at gmail.com>
> Date: Tue Mar 25 20:50:58 2014 +0400
>
> MIPS: mach-xburst: drop serial.c
>
> We use dts for serial port initialization,
> so we have no need in mach-xburst/serial.c anymore.
>
> Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
>
> arch/mips/mach-xburst/Makefile | 1 -
> arch/mips/mach-xburst/serial.c | 60 -----------------------------------------------------
> 2 files changed, 61 deletions(-)
>
>> arch/openrisc/boards/generic/generic.c | 2 +-
>> arch/ppc/boards/freescale-p1022ds/p1022ds.c | 2 +-
>> arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 3 +-
>> arch/ppc/boards/geip-da923rc/da923rc.c | 3 +-
>> arch/x86/boards/x86_generic/generic_pc.c | 5 +-
>> arch/x86/mach-i386/Makefile | 1 -
>> arch/x86/mach-i386/generic.c | 34 ------
>> drivers/serial/serial_ns16550.c | 122 ++++++++++++++++++---
>> include/driver.h | 2 +-
>> include/ns16550.h | 11 +--
>> 19 files changed, 187 insertions(+), 78 deletions(-)
>> create mode 100644 arch/mips/mach-xburst/serial.c
>> delete mode 100644 arch/x86/mach-i386/generic.c
>>
>> diff --git a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
>> index e2ad1c8..69967c5 100644
>> --- a/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
>> +++ b/arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c
>> @@ -223,7 +223,7 @@ static int eukrea_cpuimx27_console_init(void)
>> imx27_setup_weimcs(3, 0x0000D603, 0x0D1D0D01, 0x00D20000);
>> #ifdef CONFIG_DRIVER_SERIAL_NS16550
>> add_ns16550_device(DEVICE_ID_DYNAMIC, MX27_CS3_BASE_ADDR + QUART_OFFSET, 0xf,
>> - IORESOURCE_MEM_16BIT, &quad_uart_serial_plat);
>> + IORESOURCE_MEM | IORESOURCE_MEM_16BIT, &quad_uart_serial_plat);
>> #endif
>> return 0;
>> }
>> diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
>> index 776b4c0..209be0b 100644
>> --- a/arch/arm/mach-mvebu/armada-370-xp.c
>> +++ b/arch/arm/mach-mvebu/armada-370-xp.c
>> @@ -60,7 +60,8 @@ static int armada_370_xp_add_uart(void)
>> uart_plat.clock = clk_get_rate(tclk);
>> if (!add_ns16550_device(DEVICE_ID_DYNAMIC,
>> (unsigned int)CONSOLE_UART_BASE, 32,
>> - IORESOURCE_MEM_32BIT, &uart_plat))
>> + IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
>> + &uart_plat))
>> return -ENODEV;
>> return 0;
>> }
>> diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
>> index 1284220..c79d130 100644
>> --- a/arch/arm/mach-mvebu/kirkwood.c
>> +++ b/arch/arm/mach-mvebu/kirkwood.c
>> @@ -58,7 +58,8 @@ static int kirkwood_add_uart(void)
>> uart_plat.clock = clk_get_rate(tclk);
>> if (!add_ns16550_device(DEVICE_ID_DYNAMIC,
>> (unsigned int)CONSOLE_UART_BASE, 32,
>> - IORESOURCE_MEM_32BIT, &uart_plat))
>> + IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
>> + &uart_plat))
>> return -ENODEV;
>> return 0;
>> }
>> diff --git a/arch/arm/mach-socfpga/xload.c b/arch/arm/mach-socfpga/xload.c
>> index 0b99db0..6586ada 100644
>> --- a/arch/arm/mach-socfpga/xload.c
>> +++ b/arch/arm/mach-socfpga/xload.c
>> @@ -45,8 +45,8 @@ static void socfpga_uart_init(void)
>> clks[uart] = clk_fixed("uart", 100000000);
>> clkdev_add_physbase(clks[uart], CYCLONE5_UART0_ADDRESS, NULL);
>> clkdev_add_physbase(clks[uart], CYCLONE5_UART1_ADDRESS, NULL);
>> - add_ns16550_device(0, 0xffc02000, 1024, IORESOURCE_MEM_8BIT,
>> - &uart_pdata);
>> + add_ns16550_device(0, 0xffc02000, 1024, IORESOURCE_MEM |
>> + IORESOURCE_MEM_8BIT, &uart_pdata);
>> }
>>
>> static void socfpga_timer_init(void)
>> diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
>> index cc2d748..bdd7960 100644
>> --- a/arch/arm/mach-tegra/tegra20.c
>> +++ b/arch/arm/mach-tegra/tegra20.c
>> @@ -50,7 +50,7 @@ static int tegra20_add_debug_console(void)
>> return -ENODEV;
>>
>> add_ns16550_device(DEVICE_ID_DYNAMIC, base, 8 << debug_uart.shift,
>> - IORESOURCE_MEM_8BIT, &debug_uart);
>> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &debug_uart);
>>
>> return 0;
>> }
>> diff --git a/arch/mips/boards/dlink-dir-320/serial.c b/arch/mips/boards/dlink-dir-320/serial.c
>> index bddb683..eb87379 100644
>> --- a/arch/mips/boards/dlink-dir-320/serial.c
>> +++ b/arch/mips/boards/dlink-dir-320/serial.c
>> @@ -36,7 +36,7 @@ static int dir320_console_init(void)
>>
>> /* Register the serial port */
>> add_ns16550_device(DEVICE_ID_DYNAMIC, DEBUG_LL_UART_ADDR, 8,
>> - IORESOURCE_MEM_8BIT, &serial_plat);
>> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>>
>> return 0;
>> }
>> diff --git a/arch/mips/boards/loongson-ls1b/serial.c b/arch/mips/boards/loongson-ls1b/serial.c
>> index d8e0f7c..7159ab7 100644
>> --- a/arch/mips/boards/loongson-ls1b/serial.c
>> +++ b/arch/mips/boards/loongson-ls1b/serial.c
>> @@ -15,7 +15,7 @@ static int console_init(void)
>> barebox_set_hostname("ls1b");
>>
>> add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(LS1X_UART2_BASE),
>> - 8, IORESOURCE_MEM_8BIT, &serial_plat);
>> + 8, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>>
>> return 0;
>> }
>> diff --git a/arch/mips/mach-ar231x/ar231x.c b/arch/mips/mach-ar231x/ar231x.c
>> index ca912bf..06d2edb 100644
>> --- a/arch/mips/mach-ar231x/ar231x.c
>> +++ b/arch/mips/mach-ar231x/ar231x.c
>> @@ -189,7 +189,7 @@ static int ar2312_console_init(void)
>> /* Register the serial port */
>> serial_plat.clock = ar2312_sys_frequency();
>> add_ns16550_device(DEVICE_ID_DYNAMIC, KSEG1ADDR(AR2312_UART0),
>> - 8 << AR2312_UART_SHIFT, IORESOURCE_MEM_8BIT, &serial_plat);
>> + 8 << AR2312_UART_SHIFT, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>> return 0;
>> }
>> console_initcall(ar2312_console_init);
>> diff --git a/arch/mips/mach-xburst/serial.c b/arch/mips/mach-xburst/serial.c
>> new file mode 100644
>> index 0000000..4365d19
>> --- /dev/null
>> +++ b/arch/mips/mach-xburst/serial.c
>> @@ -0,0 +1,60 @@
>> +/*
>> + * Copyright (C) 2013 Antony Pavlov <antonynpavlov at gmail.com>
>> + *
>> + * Based on the linux kernel JZ4740 serial support:
>> + * Copyright (C) 2010, Lars-Peter Clausen <lars at metafoo.de>
>> + *
>> + * This file is part of barebox.
>> + * See file CREDITS for list of people who contributed to this project.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2
>> + * as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + */
>> +
>> +#include <common.h>
>> +#include <ns16550.h>
>> +#include <io.h>
>> +#include <mach/devices.h>
>> +
>> +#define JZ_UART_SHIFT 2
>> +
>> +#define ier (1 << JZ_UART_SHIFT)
>> +#define fcr (2 << JZ_UART_SHIFT)
>> +
>> +static void jz_serial_reg_write(unsigned int val, unsigned long base,
>> + unsigned char reg_offset)
>> +{
>> + switch (reg_offset) {
>> + case fcr:
>> + val |= 0x10; /* Enable uart module */
>> + break;
>> + case ier:
>> + val |= (val & 0x4) << 2;
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + writeb(val & 0xff, (void *)(base + reg_offset));
>> +}
>> +
>> +struct device_d *jz_add_uart(int id, unsigned long base, unsigned int clock)
>> +{
>> + struct NS16550_plat *serial_plat;
>> +
>> + serial_plat = xzalloc(sizeof(*serial_plat));
>> +
>> + serial_plat->shift = JZ_UART_SHIFT;
>> + serial_plat->reg_write = &jz_serial_reg_write;
>> + serial_plat->clock = clock;
>> +
>> + return add_ns16550_device(id, base, 8 << JZ_UART_SHIFT,
>> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, serial_plat);
>> +}
>> diff --git a/arch/openrisc/boards/generic/generic.c b/arch/openrisc/boards/generic/generic.c
>> index 290e05c..1d6ac8a 100644
>> --- a/arch/openrisc/boards/generic/generic.c
>> +++ b/arch/openrisc/boards/generic/generic.c
>> @@ -15,7 +15,7 @@ static int openrisc_console_init(void)
>> barebox_set_hostname("or1k");
>>
>> /* Register the serial port */
>> - add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024, IORESOURCE_MEM_8BIT, &serial_plat);
>> + add_ns16550_device(DEVICE_ID_DYNAMIC, OPENRISC_SOPC_UART_BASE, 1024, IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>>
>> #ifdef CONFIG_DRIVER_NET_ETHOC
>> add_generic_device("ethoc", DEVICE_ID_DYNAMIC, NULL,
>> diff --git a/arch/ppc/boards/freescale-p1022ds/p1022ds.c b/arch/ppc/boards/freescale-p1022ds/p1022ds.c
>> index c800064..57e7953 100644
>> --- a/arch/ppc/boards/freescale-p1022ds/p1022ds.c
>> +++ b/arch/ppc/boards/freescale-p1022ds/p1022ds.c
>> @@ -130,7 +130,7 @@ static int p1022ds_console_init(void)
>>
>> serial_plat.clock = fsl_get_bus_freq(0);
>> add_ns16550_device(DEVICE_ID_DYNAMIC, CFG_IMMR + 0x4500, 16,
>> - IORESOURCE_MEM_8BIT, &serial_plat);
>> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT, &serial_plat);
>> return 0;
>> }
>>
>> diff --git a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
>> index 229ae41..385a436 100644
>> --- a/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
>> +++ b/arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
>> @@ -112,7 +112,8 @@ static int p2020_console_init(void)
>>
>> serial_plat.clock = fsl_get_bus_freq(0);
>>
>> - add_ns16550_device(DEVICE_ID_DYNAMIC, 0xffe04500, 16, IORESOURCE_MEM_8BIT,
>> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0xffe04500, 16,
>> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
>> &serial_plat);
>> return 0;
>> }
>> diff --git a/arch/ppc/boards/geip-da923rc/da923rc.c b/arch/ppc/boards/geip-da923rc/da923rc.c
>> index 976aa8d..3d77349 100644
>> --- a/arch/ppc/boards/geip-da923rc/da923rc.c
>> +++ b/arch/ppc/boards/geip-da923rc/da923rc.c
>> @@ -115,7 +115,8 @@ static int da923rc_console_init(void)
>> barebox_set_model("unknown");
>>
>> serial_plat.clock = fsl_get_bus_freq(0);
>> - add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16, IORESOURCE_MEM_8BIT,
>> + add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16,
>> + IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
>> &serial_plat);
>> return 0;
>> }
>> diff --git a/arch/x86/boards/x86_generic/generic_pc.c b/arch/x86/boards/x86_generic/generic_pc.c
>> index 895b88d..69c6f58 100644
>> --- a/arch/x86/boards/x86_generic/generic_pc.c
>> +++ b/arch/x86/boards/x86_generic/generic_pc.c
>> @@ -141,8 +141,6 @@ device_initcall(devices_init);
>>
>> static struct NS16550_plat serial_plat = {
>> .clock = 1843200,
>> - .reg_read = x86_uart_read,
>> - .reg_write = x86_uart_write,
>> };
>>
>> static int pc_console_init(void)
>> @@ -151,7 +149,8 @@ static int pc_console_init(void)
>> barebox_set_hostname("x86");
>>
>> /* Register the serial port */
>> - add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, 0, &serial_plat);
>> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0x3f8, 8, IORESOURCE_IO, &serial_plat);
>> + add_ns16550_device(DEVICE_ID_DYNAMIC, 0x2f8, 8, IORESOURCE_IO, &serial_plat);
>>
>> return 0;
>> }
>> diff --git a/arch/x86/mach-i386/Makefile b/arch/x86/mach-i386/Makefile
>> index 10712e6..e46aa5b 100644
>> --- a/arch/x86/mach-i386/Makefile
>> +++ b/arch/x86/mach-i386/Makefile
>> @@ -1,4 +1,3 @@
>> -obj-y += generic.o
>> obj-y += reset.o
>>
>> # reference clocksource
>> diff --git a/arch/x86/mach-i386/generic.c b/arch/x86/mach-i386/generic.c
>> deleted file mode 100644
>> index 69cf53c..0000000
>> --- a/arch/x86/mach-i386/generic.c
>> +++ /dev/null
>> @@ -1,34 +0,0 @@
>> -/*
>> - * Copyright (C) 2009 Juergen Beisert, Pengutronix
>> - *
>> - * This program is free software; you can redistribute it and/or
>> - * modify it under the terms of the GNU General Public License as
>> - * published by the Free Software Foundation; either version 2 of
>> - * the License, or (at your option) any later version.
>> - *
>> - * This program is distributed in the hope that it will be useful,
>> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> - * GNU General Public License for more details.
>> - *
>> - *
>> - */
>> -
>> -/**
>> - * @file
>> - * @brief x86 Architecture Initialization routines
>> - */
>> -
>> -#include <io.h>
>> -
>> -/** to work with the 8250 UART driver implementation we need this function */
>> -unsigned int x86_uart_read(unsigned long base, unsigned char reg_idx)
>> -{
>> - return inb(base + reg_idx);
>> -}
>> -
>> -/** to work with the 8250 UART driver implementation we need this function */
>> -void x86_uart_write(unsigned int val, unsigned long base, unsigned char reg_idx)
>> -{
>> - outb(val, base + reg_idx);
>> -}
>> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
>> index 0c00eb1..dfe572d 100644
>> --- a/drivers/serial/serial_ns16550.c
>> +++ b/drivers/serial/serial_ns16550.c
>> @@ -47,6 +47,7 @@ struct ns16550_priv {
>> struct console_device cdev;
>> struct NS16550_plat plat;
>> int access_width;
>> + int mmio;
>> struct clk *clk;
>> uint32_t fcrval;
>> };
>> @@ -62,6 +63,87 @@ struct ns16550_drvdata {
>> };
>>
>> /**
>> + * @brief read system i/o (byte)
>> + * @param[in] addr address to read
>> + * @param[in] mmio memory i/o space or i/o port space
>> + */
>> +static inline uint8_t ns16550_sys_readb(void __iomem *addr, int mmio)
>> +{
>> + if (mmio)
>> + return readb(addr);
>> + else
>> + return (uint8_t) inb((int) addr);
>> +}
>> +
>> +/**
>> + * @brief read system i/o (word)
>> + * @param[in] addr address to read
>> + * @param[in] mmio memory i/o space or i/o port space
>> + */
>> +static inline uint16_t ns16550_sys_readw(void __iomem *addr, int mmio)
>> +{
>> + if (mmio)
>> + return readw(addr);
>> + else
>> + return (uint16_t) inw((int) addr);
>> +}
>> +
>> +/**
>> + * @brief read system i/o (dword)
>> + * @param[in] addr address to read
>> + * @param[in] mmio memory i/o space or i/o port space
>> + */
>> +static inline uint32_t ns16550_sys_readl(void __iomem *addr, int mmio)
>> +{
>> + if (mmio)
>> + return readl(addr);
>> + else
>> + return (uint32_t) inl((int) addr);
>> +}
>> +
>> +/**
>> + * @brief write system i/o (byte)
>> + * @param[in] val data to write
>> + * @param[in] addr address to write to
>> + * @param[in] mmio memory i/o space or i/o port space
>> + */
>> +static inline void ns16550_sys_writeb(uint8_t val, void __iomem *addr, int mmio)
>> +{
>> + if (mmio)
>> + writeb(val, addr);
>> + else
>> + outb(val, (int) addr);
>> +}
>> +
>> +/**
>> + * @brief read system i/o (word)
>> + * @param[in] val data to write
>> + * @param[in] addr address to write to
>> + * @param[in] mmio memory i/o space or i/o port space
>> + */
>> +static inline void ns16550_sys_writew(uint16_t val, void __iomem *addr, int mmio)
>> +{
>> + if (mmio)
>> + writew(val, addr);
>> + else
>> + outw(val, (int) addr);
>> +}
>> +
>> +/**
>> + * @brief read system i/o (dword)
>> + * @param[in] val data to write
>> + * @param[in] addr address to write to
>> + * @param[in] mmio memory i/o space or i/o port space
>> + */
>> +static inline void ns16550_sys_writel(uint32_t val, void __iomem *addr, int mmio)
>> +{
>> + if (mmio)
>> + writel(val, addr);
>> + else
>> + outl(val, (int) addr);
>> +}
>> +
>> +/**
>> * @brief read register
>> *
>> * @param[in] cdev pointer to console device
>> @@ -78,16 +160,13 @@ static uint32_t ns16550_read(struct console_device *cdev, uint32_t off)
>>
>> off <<= plat->shift;
>>
>> - if (plat->reg_read)
>> - return plat->reg_read((unsigned long)dev->priv, off);
>> -
>> switch (width) {
>> case IORESOURCE_MEM_8BIT:
>> - return readb(dev->priv + off);
>> + return ns16550_sys_readb(dev->priv + off, priv->mmio);
>> case IORESOURCE_MEM_16BIT:
>> - return readw(dev->priv + off);
>> + return ns16550_sys_readw(dev->priv + off, priv->mmio);
>> case IORESOURCE_MEM_32BIT:
>> - return readl(dev->priv + off);
>> + return ns16550_sys_readl(dev->priv + off, priv->mmio);
>> }
>> return -1;
>> }
>> @@ -109,20 +188,15 @@ static void ns16550_write(struct console_device *cdev, uint32_t val,
>>
>> off <<= plat->shift;
>>
>> - if (plat->reg_write) {
>> - plat->reg_write(val, (unsigned long)dev->priv, off);
>> - return;
>> - }
>> -
>> switch (width) {
>> case IORESOURCE_MEM_8BIT:
>> - writeb(val & 0xff, dev->priv + off);
>> + ns16550_sys_writeb(val & 0xff, dev->priv + off, priv->mmio);
>> break;
>> case IORESOURCE_MEM_16BIT:
>> - writew(val & 0xffff, dev->priv + off);
>> + ns16550_sys_writew(val & 0xffff, dev->priv + off, priv->mmio);
>> break;
>> case IORESOURCE_MEM_32BIT:
>> - writel(val, dev->priv + off);
>> + ns16550_sys_writel(val, dev->priv + off, priv->mmio);
>> break;
>> }
>> }
>> @@ -293,16 +367,32 @@ static int ns16550_probe(struct device_d *dev)
>> struct console_device *cdev;
>> struct NS16550_plat *plat = (struct NS16550_plat *)dev->platform_data;
>> struct ns16550_drvdata *devtype;
>> + struct resource *res;
>> int ret;
>>
>> ret = dev_get_drvdata(dev, (unsigned long *)&devtype);
>> if (ret)
>> devtype = &ns16550_drvdata;
>>
>> - dev->priv = dev_request_mem_region(dev, 0);
>> -
>> priv = xzalloc(sizeof(*priv));
>>
>> + res = dev_get_resource(dev, IORESOURCE_MEM, 0);
>> + priv->mmio = (res != NULL);
>> + if (res)
>> + {
>> + res = request_iomem_region(dev_name(dev),res->start,res->end);
>> + }
>> + else
>> + {
>
>
>
> Have you checked your patches with checkpatch.pl script?
>
>
>> + res = dev_get_resource(dev, IORESOURCE_IO, 0);
>> + if (res)
>> + res = request_ioport_region(dev_name(dev),res->start,res->end);
>> + }
>> + if (!res)
>> + goto err;
>> + dev->priv = (void __force __iomem *) res->start;
>> +
>> +
>> if (plat)
>> priv->plat = *plat;
>> else
>> diff --git a/include/driver.h b/include/driver.h
>> index 37797c7..ff4a5a1 100644
>> --- a/include/driver.h
>> +++ b/include/driver.h
>> @@ -276,7 +276,7 @@ static inline struct device_d *add_ns16550_device(int id, resource_size_t start,
>> resource_size_t size, int flags, struct NS16550_plat *pdata)
>> {
>> return add_generic_device("ns16550_serial", id, NULL, start, size,
>> - IORESOURCE_MEM | flags, pdata);
>> + flags, pdata);
>> }
>>
>> #ifdef CONFIG_DRIVER_NET_DM9K
>> diff --git a/include/ns16550.h b/include/ns16550.h
>> index 36aa5ff..876bb04 100644
>> --- a/include/ns16550.h
>> +++ b/include/ns16550.h
>> @@ -33,18 +33,9 @@
>> struct NS16550_plat {
>> /** Clock speed */
>> unsigned int clock;
>> - /**
>> - * register read access capability
>> - */
>> - unsigned int (*reg_read) (unsigned long base, unsigned char reg_offset);
>> - /**
>> - * register write access capability
>> - */
>> - void (*reg_write) (unsigned int val, unsigned long base,
>> - unsigned char reg_offset);
>> -
>> int shift;
>> unsigned int flags;
>> + int mmio;
>
> Do you really need this 'int mmio' here?
>
>> #define NS16650_FLAG_DISABLE_FIFO 1
>> };
>>
>> --
>> 1.7.1
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>
>
> --
> --
> Best regards,
> Antony Pavlov
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6165 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20140404/c95b5a73/attachment-0001.p7s>
More information about the barebox
mailing list