[PATCH] gpio: Add designware gpio controller support

[Sebastian Hesselbarth]

On 09/09/13 16:54, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>   drivers/gpio/Kconfig   |   6 ++
>   drivers/gpio/Makefile  |   1 +
>   drivers/gpio/gpio-dw.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 158 insertions(+)
>   create mode 100644 drivers/gpio/gpio-dw.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index d5ac532..18d3135 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -54,6 +54,12 @@ config GPIO_TEGRA
>   	help
>   	  Say yes here to include the driver for the GPIO controller found on the
>   	  Tegra line of SoCs.
> +
> +config GPIO_DESIGNWARE
> +	tristate "Synopsys DesignWare GPIO driver"

Sascha,

I know DW's GPIO is also used on Armada 1500 which I currently work on.
Precisely, the IP is named dw-apb-gpio. Maybe the above should also
reflect APB.

[...]
> diff --git a/drivers/gpio/gpio-dw.c b/drivers/gpio/gpio-dw.c
> new file mode 100644
> index 0000000..54e7452
> --- /dev/null
> +++ b/drivers/gpio/gpio-dw.c
> @@ -0,0 +1,151 @@
[...]
> +#include <common.h>
> +#include <errno.h>
> +#include <io.h>
> +#include <gpio.h>
> +#include <init.h>
> +
> +#define GPIO_INT_EN_REG_OFFSET 		0x30
> +#define GPIO_INT_MASK_REG_OFFSET 	0x34
> +#define GPIO_INT_TYPE_LEVEL_REG_OFFSET 	0x38
> +#define GPIO_INT_POLARITY_REG_OFFSET 	0x3c
> +#define GPIO_INT_STATUS_REG_OFFSET 	0x40
> +#define GPIO_PORT_A_EOI_REG_OFFSET 	0x4c

I have seen this driver and think it can be improved by exploiting
its config1/2 registers where synthesis settings are stored. Please
also look at [1] pp.1229; you can read out number of ports, port
width, interrupt, and debounce features.

Unfortunately, I am not ready to run barebox on Armada 1500 and I
don't have a socfpga to test. So if you are not eager to modify it now,
I can add config reg based read-out later.

[1] http://www.altera.com/literature/hb/arria-v/hps.pdf

[...]
> +static __maybe_unused struct of_device_id dwgpio_match[] = {
> +	{
> +		.compatible = "snps,dw-gpio",
> +	}, {

Please add "snps,dw-apb-gpio", that's what the linux driver
will look for if make to pick it up for Armada 1500.

Sebastian