[PATCH 4/4] ARM: support for CPO Science DataCollector II

[Sascha Hauer]

On Tue, Sep 03, 2013 at 11:06:24AM -0400, Darren Garnier wrote:
> Hi Jean-Christophe,
> 
> > 
> > use init script for this
> 
> ack.
> 
> My reasoning here was not to mount the nand0 unless we were doing dfu.  Now that you point it out,
> I see the error in my reasoning.. the time consuming part of the NAND is in the initial device driver load,
> not in adding the partition table.
> 

It shouldn't be very time consuming when you use bad block tables.

If it's still too long for you then we could implement the 'detect'
mechanism recently introduced for SD/MMC/ATA devices.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |