[PATCH v2 0/4] Update P2020RDB board support to allow NFS booting.
Renaud Barbier
renaud.barbier at ge.com
Tue Sep 3 10:54:23 EDT 2013
This patchset addresses all the comments regarding the initial patch [2/4].
The comments in respect of the function fdt_stdout_setup have been addressed
by:
- Removing the check on the existence of the /chosen node.
- Returning an errno value instead of 1.
The comments in respect of the MAC fixup function have been addressed by:
- Removing the fixup function from the initial patch.
- Updating eth_of_fixup to set the MAC address based on the Ethernet device
node alias.
Since eth_of_fixup is conditionally compiled, the P2020RDB configuration file
in patch [4/4] is updated to enable CONFIG_OFDEVICE.
Renaud Barbier (4):
of: base: import of_find_node_by_type
ppc: add and update device tree fixup functions
ppc: bootm: relocate fdt to valid boot memory
ppc: P2020RDB configuration update
arch/ppc/boards/freescale-p2020rdb/env/bin/init | 3 +
arch/ppc/boards/freescale-p2020rdb/env/config | 2 +
arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 7 +
arch/ppc/configs/p2020rdb_defconfig | 14 ++-
arch/ppc/include/asm/processor.h | 2 +
arch/ppc/lib/ppclinux.c | 49 ++++++++-
arch/ppc/mach-mpc85xx/Makefile | 1 +
arch/ppc/mach-mpc85xx/fdt.c | 146 +++++++++++++++++++++++
drivers/of/base.c | 29 +++++
include/of.h | 2 +
net/eth.c | 20 ++--
11 files changed, 264 insertions(+), 11 deletions(-)
create mode 100644 arch/ppc/boards/freescale-p2020rdb/env/bin/init
create mode 100644 arch/ppc/boards/freescale-p2020rdb/env/config
create mode 100644 arch/ppc/mach-mpc85xx/fdt.c
More information about the barebox
mailing list