[PATCH] PCM051: Fix muxing of MMC0 CD

[Teresa Gámez]

Card detect should be rather muxed as gpio then
mmc0_sdcd, as driver does not support this.

Signed-off-by: Teresa Gámez <t.gamez at phytec.de>
---
 arch/arm/boards/pcm051/mux.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boards/pcm051/mux.c b/arch/arm/boards/pcm051/mux.c
index 6ef5af1..b54f3d5 100644
--- a/arch/arm/boards/pcm051/mux.c
+++ b/arch/arm/boards/pcm051/mux.c
@@ -10,7 +10,7 @@ static const struct module_pin_mux mmc0_pin_mux[] = {
 	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
 	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
 	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
-	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},	/* MMC0_CD */
+	{OFFSET(spi0_cs1), (MODE(7) | RXACTIVE | PULLUP_EN)},	/* MMC0_CD */
 	{-1},
 };
 
-- 
1.7.0.4