[PATCH 6/6] ppc: mpc85xx: build directives

[Renaud Barbier]

Add the Kconfig and Makefile directives to build barebox
for the GEIP DA923RC board.

Signed-off-by: Renaud Barbier <renaud.barbier at ge.com>
---
 arch/ppc/Makefile              |  1 +
 arch/ppc/mach-mpc85xx/Kconfig  | 32 +++++++++++++++++++++++++-------
 arch/ppc/mach-mpc85xx/Makefile |  1 +
 3 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index f0322a2..aa00c96 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -13,6 +13,7 @@ endif
 
 board-$(CONFIG_MACH_PHYCORE_MPC5200B_TINY)	:= pcm030
 board-$(CONFIG_P2020RDB)			:= freescale-p2020rdb
+board-$(CONFIG_DA923RC)				:= geip-da923rc
 
 machine-$(CONFIG_ARCH_MPC5200)			:= mpc5xxx
 machine-$(CONFIG_ARCH_MPC85XX)			:= mpc85xx
diff --git a/arch/ppc/mach-mpc85xx/Kconfig b/arch/ppc/mach-mpc85xx/Kconfig
index 9af4af4..80cb0d9 100644
--- a/arch/ppc/mach-mpc85xx/Kconfig
+++ b/arch/ppc/mach-mpc85xx/Kconfig
@@ -3,10 +3,19 @@ if ARCH_MPC85XX
 config TEXT_BASE
 	hex
 	default 0xeff80000 if P2020RDB
+	default 0xfff80000 if DA923RC
 
 config MPC85xx
 	bool
-	default y if P2020RDB
+	default y
+
+config BOOKE
+	bool
+	default y
+
+config E500
+	bool
+	default y
 
 choice
 	prompt "Select your board"
@@ -16,8 +25,11 @@ config P2020RDB
 	help
 	  Say Y here if you are using the Freescale P2020RDB
 
+config DA923RC
+	bool "DA923RC"
+	help
+	Say Y here if you are using the GE Intelligent Platforms DA923RC
 endchoice
-
 endif
 
 if P2020RDB
@@ -25,15 +37,21 @@ config P2020
 	bool
 	default y
 
-config BOOKE
+config FSL_ELBC
 	bool
 	default y
+endif
 
-config E500
+if DA923RC
+config MPC8544
 	bool
 	default y
 
-config FSL_ELBC
-	bool
-	default y
+config DDR_SPD
+    bool
+    default y
+
+config FSL_DDR2
+    bool
+    default y
 endif
diff --git a/arch/ppc/mach-mpc85xx/Makefile b/arch/ppc/mach-mpc85xx/Makefile
index b484d40..2051b57 100644
--- a/arch/ppc/mach-mpc85xx/Makefile
+++ b/arch/ppc/mach-mpc85xx/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_MP)	+= mp.o
 obj-$(CONFIG_OFTREE)	+= fdt.o
 obj-$(CONFIG_I2C_IMX)	+= fsl_i2c.o
 obj-$(CONFIG_DRIVER_NET_GIANFAR) += eth-devices.o
+obj-$(CONFIG_DDR_SPD)	+= ../ddr-8xxx/
-- 
1.8.3.4