[PATCH] bcb: fix compilation

[Sascha Hauer]

On Thu, Oct 24, 2013 at 03:26:52PM +0200, Eric Bénard wrote:
> this fix :
> arch/arm/mach-mxs/bcb.c:268: error: too few arguments to function 'chip->ecc.read_page_raw'
> arch/arm/mach-mxs/bcb.c:309: error: too few arguments to function 'chip->write_page'
> 
> caution : this is NOT runtime tested.
> 
> Signed-off-by: Eric Bénard <eric at eukrea.com>

Applied, thanks

Sascha

> ---
>  arch/arm/mach-mxs/bcb.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/bcb.c b/arch/arm/mach-mxs/bcb.c
> index af51d24..b5d793e 100644
> --- a/arch/arm/mach-mxs/bcb.c
> +++ b/arch/arm/mach-mxs/bcb.c
> @@ -265,7 +265,7 @@ static int find_fcb(struct mtd_info *mtd, void *ref, int page)
>  
>  	chip->select_chip(mtd, 0);
>  	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
> -	ret = chip->ecc.read_page_raw(mtd, chip, buf);
> +	ret = chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
>  	if (ret) {
>  		printf("Failed to read FCB from page %u: %d\n", page, ret);
>  		return ret;
> @@ -306,7 +306,7 @@ static int write_fcb(struct mtd_info *mtd, void *buf, int block)
>  
>  	printf("Writing FCB to block %08x\n", block);
>  	chip->select_chip(mtd, 0);
> -	ret = chip->write_page(mtd, chip, buf, page, 0, 1);
> +	ret = chip->write_page(mtd, chip, 0, mtd->erasesize, buf, 1, page, 0, 1);
>  	if (ret) {
>  		printf("Failed to write FCB to block %08x: %d\n", block, ret);
>  	}
> -- 
> 1.8.3.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |