[PATCH v2] Add support for Voipac X53-DMM-668 module

[Rostislav Lisovy]

This patchset adds support for Voipac X53-DMM-668 module equipped
with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668

The board specific code enables UART0, NAND flash, Ethernet.

Changes since v1:
  Use gpio_request()
  Use already defined VMX53 MACH_TYPE
  A bit of code refactoring

Rostislav Lisovy (1):
  i.MX53: vmx53: Add support for Voipac X53-DMM-668 (aka vmx53) module

 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-vmx53/Makefile      |    3 +
 arch/arm/boards/freescale-mx53-vmx53/board.c       |  183 ++++++++++++++++++++
 arch/arm/boards/freescale-mx53-vmx53/env/config    |   46 +++++
 .../arm/boards/freescale-mx53-vmx53/flash_header.c |  103 +++++++++++
 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c    |    9 +
 arch/arm/mach-imx/Kconfig                          |    9 +
 7 files changed, 354 insertions(+)
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c

-- 
1.7.10.4