[PATCH 1/1] macb: add support to read the mac address from register

[Sascha Hauer]

On Thu, Oct 03, 2013 at 11:45:29AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> check the 4 mac address register and return at the first valid
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>

Applied, thanks

Sascha

> ---
>  drivers/net/macb.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index b1f544b..d8523ce 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -458,9 +458,31 @@ static int macb_phy_write(struct mii_bus *bus, int addr, int reg, u16 value)
>  static int macb_get_ethaddr(struct eth_device *edev, unsigned char *adr)
>  {
>  	struct macb_device *macb = edev->priv;
> +	u32 bottom;
> +	u16 top;
> +	u8 addr[6];
> +	int i;
>  
>  	dev_dbg(macb->dev, "%s\n", __func__);
>  
> +	/* Check all 4 address register for vaild address */
> +	for (i = 0; i < 4; i++) {
> +		bottom = macb_or_gem_readl(macb, SA1B + i * 8);
> +		top = macb_or_gem_readl(macb, SA1T + i * 8);
> +
> +		addr[0] = bottom & 0xff;
> +		addr[1] = (bottom >> 8) & 0xff;
> +		addr[2] = (bottom >> 16) & 0xff;
> +		addr[3] = (bottom >> 24) & 0xff;
> +		addr[4] = top & 0xff;
> +		addr[5] = (top >> 8) & 0xff;
> +
> +		if (is_valid_ether_addr(addr)) {
> +			memcpy(adr, addr, sizeof(addr));
> +			return 0;
> +		}
> +	}
> +
>  	return -1;
>  }
>  
> -- 
> 1.8.4.rc3
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |