[PATCH 0/4] Add support for Voipac X53-DMM-668 module

[Jean-Christophe PLAGNIOL-VILLARD]

On 23:35 Tue 01 Oct     , Rostislav Lisovy wrote:
> This patchset adds support for Voipac X53-DMM-668 module equipped
> with i.mx53 CPU. More info about the module may be found at:
> http://www.voipac.com/#X53-DMM-668
> 
> The board specific code enables UART0, NAND flash, Ethernet.
> The flash_header.c containing DCD configuration data is almost
> the same (except for one line) as the one in freescale-mx53-smd.
> 
> 

squash the 4 patch in one please

> Rostislav Lisovy (4):
>   i.mx53: voipac: Change machine type identifier
>   i.mx53: voipac: Add board specific + flash header constructing code
>   i.mx53: voipac: Add barebox environment configuration file
>   i.mx53: voipac: Modify Make- and config-files to enable building of
>     mx53-voipac
> 
>  arch/arm/boards/Makefile                           |    1 +
>  arch/arm/boards/freescale-mx53-voipac/Makefile     |    3 +
>  arch/arm/boards/freescale-mx53-voipac/board.c      |  168 ++++++++++++++++++++
>  arch/arm/boards/freescale-mx53-voipac/env/config   |   46 ++++++
>  .../boards/freescale-mx53-voipac/flash_header.c    |  102 ++++++++++++
>  arch/arm/boards/freescale-mx53-voipac/lowlevel.c   |    9 ++
>  arch/arm/mach-imx/Kconfig                          |   10 ++
>  arch/arm/tools/mach-types                          |    2 +-
>  8 files changed, 340 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
>  create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
>  create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
>  create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
>  create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
> 
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox