[PATCH 0/4] Add support for Voipac X53-DMM-668 module

[Rostislav Lisovy]

This patchset adds support for Voipac X53-DMM-668 module equipped
with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668

The board specific code enables UART0, NAND flash, Ethernet.
The flash_header.c containing DCD configuration data is almost
the same (except for one line) as the one in freescale-mx53-smd.


Rostislav Lisovy (4):
  i.mx53: voipac: Change machine type identifier
  i.mx53: voipac: Add board specific + flash header constructing code
  i.mx53: voipac: Add barebox environment configuration file
  i.mx53: voipac: Modify Make- and config-files to enable building of
    mx53-voipac

 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-voipac/Makefile     |    3 +
 arch/arm/boards/freescale-mx53-voipac/board.c      |  168 ++++++++++++++++++++
 arch/arm/boards/freescale-mx53-voipac/env/config   |   46 ++++++
 .../boards/freescale-mx53-voipac/flash_header.c    |  102 ++++++++++++
 arch/arm/boards/freescale-mx53-voipac/lowlevel.c   |    9 ++
 arch/arm/mach-imx/Kconfig                          |   10 ++
 arch/arm/tools/mach-types                          |    2 +-
 8 files changed, 340 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c

-- 
1.7.10.4