[PATCH 08/11] mtd: nand: gpmi: use io_base instead of MXS_GPMI_BASE

Sascha Hauer s.hauer at pengutronix.de
Wed Jul 10 07:59:58 EDT 2013


we have io_base, so use it instead of hardcoded base
address.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/mtd/nand/nand_mxs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/nand_mxs.c b/drivers/mtd/nand/nand_mxs.c
index 2086f80..52a4959 100644
--- a/drivers/mtd/nand/nand_mxs.c
+++ b/drivers/mtd/nand/nand_mxs.c
@@ -408,7 +408,7 @@ static int mxs_nand_device_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 	struct mxs_nand_info *nand_info = chip->priv;
-	void __iomem *gpmi_regs = (void *)MXS_GPMI_BASE;
+	void __iomem *gpmi_regs = nand_info->io_base;
 	uint32_t tmp;
 
 	if (nand_info->version > GPMI_VERSION_TYPE_MX23) {
@@ -1130,7 +1130,7 @@ int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info)
  */
 int mxs_nand_hw_init(struct mxs_nand_info *info)
 {
-	void __iomem *gpmi_regs = (void *)MXS_GPMI_BASE;
+	void __iomem *gpmi_regs = info->io_base;
 	void __iomem *bch_regs = (void __iomem *)MXS_BCH_BASE;
 	int i = 0, ret;
 	u32 val;
@@ -1195,7 +1195,6 @@ static int mxs_nand_probe(struct device_d *dev)
 		return -ENOMEM;
 	}
 
-	/* XXX: Remove u-boot specific access pointers and use io_base instead? */
 	nand_info->io_base = dev_request_mem_region(dev, 0);
 
 	nand_info->clk = clk_get(dev, NULL);
-- 
1.8.3.2




More information about the barebox mailing list