[PATCH 2/2] configs: mx28evk: add NAND support

[Wolfram Sang]

Took the mx28evk defconfig, activated DMA and NAND, used savedefconfig;
this patch is the result.

Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
 arch/arm/configs/imx28evk_defconfig |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/configs/imx28evk_defconfig b/arch/arm/configs/imx28evk_defconfig
index 0cc269b..3b69d4d 100644
--- a/arch/arm/configs/imx28evk_defconfig
+++ b/arch/arm/configs/imx28evk_defconfig
@@ -12,41 +12,41 @@ CONFIG_GLOB=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_PARTITION=y
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/freescale-mx28-evk/env"
 CONFIG_DEBUG_INFO=y
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_SLEEP=y
 CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_LOADENV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_READLINE=y
+CONFIG_CMD_TFTP=y
 CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_MTEST=y
-CONFIG_CMD_MTEST_ALTERNATIVE=y
-CONFIG_CMD_BOOTM_ZLIB=y
-CONFIG_CMD_BOOTM_BZLIB=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_SPLASH=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
-CONFIG_CMD_SPLASH=y
 CONFIG_CMD_GPIO=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
 CONFIG_NET_RESOLV=y
 CONFIG_DRIVER_NET_FEC_IMX=y
 # CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_MXS=y
 CONFIG_VIDEO=y
 CONFIG_DRIVER_VIDEO_STM=y
 CONFIG_MCI=y
 CONFIG_MCI_STARTUP=y
 CONFIG_MCI_MXS=y
+CONFIG_MXS_APBH_DMA=y
+CONFIG_FS_TFTP=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FAT_LFN=y
-- 
1.7.10.4