[PATCH 14/14] Add support for Archos G9 tablet

[Jan Weitzel]

Am Sonntag, den 21.10.2012, 03:00 +0200 schrieb vj:
> On Fri, Oct 19, 2012 at 1:10 PM, Jan Weitzel <J.Weitzel at phytec.de> wrote:
> >> diff --git a/arch/arm/boards/archosg9/lowlevel.c b/arch/arm/boards/archosg9/lowlevel.c
> >> new file mode 100644
> >> index 0000000..fa5be1d
> >> --- /dev/null
> >> +++ b/arch/arm/boards/archosg9/lowlevel.c
> >> @@ -0,0 +1,79 @@
> >> +/*
> >> + * This program is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License as
> >> + * published by the Free Software Foundation; either version 2 of
> >> + * the License, or (at your option) any later version.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> + */
> >> +
> >> +#include <common.h>
> >> +#include <io.h>
> >> +#include <init.h>
> >> +#include <mach/omap4-mux.h>
> >> +#include <mach/omap4-silicon.h>
> >> +#include <mach/omap4-clock.h>
> >> +#include <mach/syslib.h>
> >> +#include <asm/barebox-arm.h>
> >> +#include <asm/barebox-arm-head.h>
> >> +#include "mux.h"
> >> +
> >> +#define TPS62361_VSEL0_GPIO    7
> >> +
> >> +static const struct ddr_regs ddr_regs_400_mhz_2cs = {
> >> +     .tim1         = 0x10EB0662,
> >> +     .tim2         = 0x20370DD2,
> >> +     .tim3         = 0x00B1C33F,
> >> +     .phy_ctrl_1   = 0x849FF408,
> >> +     .ref_ctrl     = 0x00000618,
> >> +     .config_init  = 0x80000EB9,
> >> +     .config_final = 0x80001AB9,
> >> +     .zq_config    = 0xD00B3215,
> >> +     .mr1          = 0x83,
> >> +     .mr2          = 0x4
> >> +};
> >> +
> >> +static noinline void archosg9_init_lowlevel(void)
> >> +{
> >> +     struct dpll_param core = OMAP4_CORE_DPLL_PARAM_19M2_DDR400;
> >> +     struct dpll_param mpu = OMAP4_MPU_DPLL_PARAM_19M2_MPU600;
> > This if OPP100 for 4430, for 4460 OPP100 defines 700MHz.
> >> +     struct dpll_param iva = OMAP4_IVA_DPLL_PARAM_19M2;
> >> +     struct dpll_param per = OMAP4_PER_DPLL_PARAM_19M2;
> >> +     struct dpll_param abe = OMAP4_ABE_DPLL_PARAM_19M2;
> >> +     struct dpll_param usb = OMAP4_USB_DPLL_PARAM_19M2;
> >> +
> >> +     writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);
> >> +
> >> +     /* Configure all DPLL's at 100% OPP */
> >> +     omap4_configure_mpu_dpll(&mpu);
> >> +     omap4_configure_iva_dpll(&iva);
> >> +     omap4_configure_per_dpll(&per);
> >> +     omap4_configure_abe_dpll(&abe);
> >> +     omap4_configure_usb_dpll(&usb);
> >> +
> >> +     /* Enable all clocks */
> >> +     omap4_enable_all_clocks();
> >> +
> >> +     set_muxconf_regs();
> >> +
> >> +     omap4_ddr_init(&ddr_regs_400_mhz_2cs, &core);
> >> +
> >> +     /* Set VCORE1 = 1.3 V, VCORE2 = VCORE3 = 1.21V */
> >> +     omap4_scale_vcores(TPS62361_VSEL0_GPIO);
> > According to TIs DM the sequence for going into a higher OPP is to first
> > raise the voltage. I saw this is also wrong on pandaboard.
> > They also say rise core freq before mpu freq so the order should be
> > omap4_scale_vcores
> > omap4_ddr_init
> > omap4_configure_mpu_dpll
> >
> > I'll fix and test the order on PCM049
> >
> > Jan
> 
> The only way I could make it work on archosG9 is with this order:
>   set_muxconf_regs();
>   writel(CM_SYS_CLKSEL_19M2, CM_SYS_CLKSEL);
>   omap4_enable_all_clocks();
>   omap4_scale_vcores(TPS62361_VSEL0_GPIO);
>   omap4_ddr_init(&ddr_regs_400_mhz_2cs, &core);
>   omap4_configure_mpu_dpll(&mpu);
>   ...
I think you need al least omap4_enable_gpio1_wup_clocks for using TPS62361_VSEL0_GPIO.

Jan
> Is this correct? That is, enable_all_clocks can be done before scale_vcores?
> It will depend on the default clock frequencies, I think.
> 
> Vicente