[PATCH 03/28] ARM at91rm9200: provide reset function for boards with lowlevel init
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Thu Oct 18 03:27:18 EDT 2012
On 23:03 Wed 17 Oct , Sascha Hauer wrote:
> Some Atmel boards use a reset() function provided by the architecture.
> Add a reset function for the board instead and call the architecture
> specific init function from there. While at it, test if we are running
> from SDRAM and skip the init function in this case. This makes the configs
> safe for both first and second stage.
same as sam9
Best Regards,
J.
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
> arch/arm/boards/at91rm9200ek/Makefile | 2 ++
> arch/arm/mach-at91/Kconfig | 3 +++
> arch/arm/mach-at91/Makefile | 7 ++-----
> arch/arm/mach-at91/at91rm9200_lowlevel_init.c | 9 ++++++---
> arch/arm/mach-at91/include/mach/board.h | 1 +
> 5 files changed, 14 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boards/at91rm9200ek/Makefile b/arch/arm/boards/at91rm9200ek/Makefile
> index eb072c0..47ab803 100644
> --- a/arch/arm/boards/at91rm9200ek/Makefile
> +++ b/arch/arm/boards/at91rm9200ek/Makefile
> @@ -1 +1,3 @@
> obj-y += init.o
> +obj-y += lowlevel.o
> +pbl-y += lowlevel.o
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index f962084..8ec033b 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -110,6 +110,9 @@ config SUPPORT_CALAO_MOB_TNY_MD2
> config HAVE_AT91SAM926X_LOWLEVEL_INIT
> bool
>
> +config HAVE_AT91RM9200_LOWLEVEL_INIT
> + bool
> +
> # ----------------------------------------------------------
>
> if ARCH_AT91RM9200
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index f9cb4f1..5ce433c 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -1,10 +1,7 @@
> obj-y += clock.o gpio.o
>
> -lowlevel_init-$(CONFIG_ARCH_AT91RM9200) = at91rm9200_lowlevel_init.o
> -obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
> -
> -pbl-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
> -
> +obj-$(CONFIG_HAVE_AT91RM9200_LOWLEVEL_INIT) += at91rm9200_lowlevel_init.o
> +pbl-$(CONFIG_HAVE_AT91RM9200_LOWLEVEL_INIT) += at91rm9200_lowlevel_init.o
> obj-$(CONFIG_HAVE_AT91SAM926X_LOWLEVEL_INIT) += at91sam926x_lowlevel_init.o
> pbl-$(CONFIG_HAVE_AT91SAM926X_LOWLEVEL_INIT) += at91sam926x_lowlevel_init.o
>
> diff --git a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> index 3ce3e67..a0a0d5e 100644
> --- a/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> +++ b/arch/arm/mach-at91/at91rm9200_lowlevel_init.c
> @@ -21,12 +21,15 @@ void static inline access_sdram(void)
> writel(0x00000000, AT91_SDRAM_BASE);
> }
>
> -void __naked __bare_init reset(void)
> +void __naked __bare_init at91rm9200_entry(unsigned long sdram_base,
> + unsigned long sdram_size)
> {
> - u32 r;
> + u32 r, pc;
> int i;
>
> - common_reset();
> + pc = get_pc();
> + if (pc < AT91_SDRAM_BASE || pc > AT91_SDRAM_BASE + 0x10000000)
> + goto end;
>
> /*
> * PMC Check if the PLL is already initialized
> diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
> index eb71ed5..fc8947d 100644
> --- a/arch/arm/mach-at91/include/mach/board.h
> +++ b/arch/arm/mach-at91/include/mach/board.h
> @@ -156,5 +156,6 @@ struct at91_spi_platform_data {
> void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata);
>
> void at91sam926x_entry(unsigned long sdram_base, unsigned long sdram_size);
> +void at91rm9200_entry(unsigned long sdram_base, unsigned long sdram_size);
>
> #endif
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
More information about the barebox
mailing list