malloc Out of memory after ubiattach operation
Sascha Hauer
s.hauer at pengutronix.de
Mon Oct 15 10:33:58 EDT 2012
Hi,
On Mon, Oct 15, 2012 at 07:57:09PM +0530, Madhu koriginja wrote:
> After barebox up, I erased the /dev/nand0.rootfs.bb using erase command.
> kernel is already present in the /dev/nand0.kernel.
> After ubiattach command, if I try the boot I am getting the below error.
> Actually my aim is to boot the kernel and it should mount to ubifs, to
> simplify the problem and reproduce the same I am just trying the boot after
> ubiattach instead of preparing the ubi0 device.
> Barebox >/ubiattach /dev/nand0.rootfs
> UBI: attaching mtd0 to ubi0
> UBI: physical eraseblock size: 1048576 bytes (1024 KiB)
> UBI: logical eraseblock size: 1044480 bytes
> UBI: smallest flash I/O unit: 4096
> UBI: sub-page size: 1024
> UBI: VID header offset: 1024 (aligned 1024)
> UBI: data offset: 4096
> UBI: empty MTD device detected
> UBI: create volume table (copy #1)
> UBI: create volume table (copy #2)
> registering /dev/ubi0
> UBI: attached mtd0 to ubi0
> UBI: MTD device name: "nand0.rootfs"
> UBI: MTD device size: 16 MiB
> UBI: number of good PEBs: 16
> UBI: number of bad PEBs: 0
> UBI: max. allowed volumes: 128
> UBI: wear-leveling threshold: 4096
> UBI: number of internal volumes: 1
> UBI: number of user volumes: 0
> UBI: available PEBs: 10
> UBI: total number of reserved PEBs: 6
> UBI: number of PEBs reserved for bad PEB handling: 2
> UBI: max/mean erase counter: 1/0
>
> Barebox >/ boot
> booting kernel of type uimage from /dev/nand0.kernel.bb
> bootm /dev/nand0.kernel.bb
> requesting xmalloc size: 2456544
> ERROR: out of memory
Try a make menuconfig and increase CONFIG_MALLOC_SIZE to whatever you
can spare.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list