[PATCH 0/5] BCM2835/Raspberry-Pi support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon Oct 15 08:43:49 EDT 2012
On 08:56 Mon 15 Oct , Sascha Hauer wrote:
>
> Jean-Christophe,
>
> Since you reviewed this series can I assume you give your Acked-by once
> you are happy with it?
I'm happy with it except one point that I just check with the mainline kernel
the DT
the timer as example is "brcm,bcm2835-system-timer" not "brcm,bcm2835-cs"
for gpio it's the right one
as we can agree to dt must be in sync
Best Regards,
J.
>
> Sascha
>
> On Sat, Oct 13, 2012 at 04:00:11PM +0200, Carlo Caione wrote:
> > The set is the same as before except for patch 05/05
> >
> > Carlo Caione (5):
> > BCM2835: add clocksource driver
> > BCM2835: add gpio driver
> > ARM1176: add support
> > BCM2835: add support (arch)
> > Raspberry-Pi: add support (board)
> >
> > arch/arm/Kconfig | 9 ++
> > arch/arm/Makefile | 2 +
> > arch/arm/boards/raspberry-pi/Makefile | 1 +
> > arch/arm/boards/raspberry-pi/config.h | 4 +
> > .../arm/boards/raspberry-pi/env/init/bootargs-base | 8 +
> > arch/arm/boards/raspberry-pi/env/init/hostname | 8 +
> > arch/arm/boards/raspberry-pi/rpi.c | 49 ++++++
> > arch/arm/configs/rpi_defconfig | 40 +++++
> > arch/arm/cpu/Kconfig | 5 +
> > arch/arm/mach-bcm2835/Kconfig | 18 +++
> > arch/arm/mach-bcm2835/Makefile | 2 +
> > arch/arm/mach-bcm2835/clock.c | 39 +++++
> > arch/arm/mach-bcm2835/core.c | 105 +++++++++++++
> > arch/arm/mach-bcm2835/include/mach/clkdev.h | 7 +
> > arch/arm/mach-bcm2835/include/mach/clock.h | 8 +
> > arch/arm/mach-bcm2835/include/mach/core.h | 27 ++++
> > arch/arm/mach-bcm2835/include/mach/gpio.h | 1 +
> > arch/arm/mach-bcm2835/include/mach/platform.h | 53 +++++++
> > arch/arm/mach-bcm2835/include/mach/wd.h | 50 +++++++
> > drivers/clocksource/Kconfig | 4 +
> > drivers/clocksource/Makefile | 1 +
> > drivers/clocksource/bcm2835.c | 95 ++++++++++++
> > drivers/gpio/Kconfig | 4 +
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/gpio-bcm2835.c | 165 +++++++++++++++++++++
> > 25 files changed, 706 insertions(+)
> > create mode 100644 arch/arm/boards/raspberry-pi/Makefile
> > create mode 100644 arch/arm/boards/raspberry-pi/config.h
> > create mode 100644 arch/arm/boards/raspberry-pi/env/init/bootargs-base
> > create mode 100644 arch/arm/boards/raspberry-pi/env/init/hostname
> > create mode 100644 arch/arm/boards/raspberry-pi/rpi.c
> > create mode 100644 arch/arm/configs/rpi_defconfig
> > create mode 100644 arch/arm/mach-bcm2835/Kconfig
> > create mode 100644 arch/arm/mach-bcm2835/Makefile
> > create mode 100644 arch/arm/mach-bcm2835/clock.c
> > create mode 100644 arch/arm/mach-bcm2835/core.c
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
> > create mode 100644 arch/arm/mach-bcm2835/include/mach/wd.h
> > create mode 100644 drivers/clocksource/bcm2835.c
> > create mode 100644 drivers/gpio/gpio-bcm2835.c
> >
> > --
> > 1.7.12.3
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list