[PATCH 2/2] ARM OMAP: Use wrapper in board files
Teresa Gámez
t.gamez at phytec.de
Thu Oct 11 03:25:35 EDT 2012
Use the omap wrappers in board files instead of add_generic_device().
Compile tested every affected board. Tested on pcm049.
Signed-off-by: Teresa Gámez <t.gamez at phytec.de>
---
arch/arm/boards/beagle/board.c | 17 +++++------------
arch/arm/boards/omap343xdsp/board.c | 12 ++++--------
arch/arm/boards/omap3evm/board.c | 18 +++++-------------
arch/arm/boards/panda/board.c | 19 +++++--------------
arch/arm/boards/pcm049/board.c | 21 +++++++--------------
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 20 +++++---------------
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 21 +++++++--------------
7 files changed, 38 insertions(+), 90 deletions(-)
diff --git a/arch/arm/boards/beagle/board.c b/arch/arm/boards/beagle/board.c
index 19bf740..bab11c8 100644
--- a/arch/arm/boards/beagle/board.c
+++ b/arch/arm/boards/beagle/board.c
@@ -62,6 +62,7 @@
#include <mach/sys_info.h>
#include <mach/syslib.h>
#include <mach/control.h>
+#include <mach/devices.h>
#include <mach/omap3-mux.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
@@ -235,11 +236,6 @@ pure_initcall(beagle_board_init);
#ifdef CONFIG_DRIVER_SERIAL_NS16550
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief UART serial port initialization - remember to enable COM clocks in
* arch
@@ -249,8 +245,7 @@ static struct NS16550_plat serial_plat = {
static int beagle_console_init(void)
{
/* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
- &serial_plat);
+ omap_add_ns16550(OMAP_UART3_BASE);
return 0;
}
@@ -287,7 +282,7 @@ static struct gpmc_nand_platform_data nand_plat = {
static int beagle_mem_init(void)
{
- arm_add_mem_device("ram0", 0x80000000, 128 * 1024 * 1024);
+ omap_add_ram0(SZ_128M);
return 0;
}
@@ -296,8 +291,7 @@ mem_initcall(beagle_mem_init);
static int beagle_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, OMAP_I2C1_BASE, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap_add_i2c(OMAP_I2C1_BASE, NULL);
#ifdef CONFIG_USB_EHCI_OMAP
if (ehci_omap_init(&omap_ehci_pdata) >= 0)
@@ -310,8 +304,7 @@ static int beagle_devices_init(void)
#endif
omap_add_gpmc_nand_device(&nand_plat);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap_add_mmc(OMAP_MMC1_BASE, NULL);
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);
diff --git a/arch/arm/boards/omap343xdsp/board.c b/arch/arm/boards/omap343xdsp/board.c
index 2343dc0..08211c3 100644
--- a/arch/arm/boards/omap343xdsp/board.c
+++ b/arch/arm/boards/omap343xdsp/board.c
@@ -45,11 +45,13 @@
#include <common.h>
#include <console.h>
+#include <sizes.h>
#include <init.h>
#include <driver.h>
#include <io.h>
#include <ns16550.h>
#include <asm/armlinux.h>
+#include <mach/devices.h>
#include <mach/silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
@@ -604,11 +606,6 @@ static void mux_config(void)
#ifdef CONFIG_DRIVER_SERIAL_NS16550
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief UART serial port initialization - remember to enable COM clocks in arch
*
@@ -617,8 +614,7 @@ static struct NS16550_plat serial_plat = {
static int sdp3430_console_init(void)
{
/* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
- &serial_plat);
+ omap_add_ns16550(OMAP_UART3_BASE);
return 0;
}
@@ -628,7 +624,7 @@ console_initcall(sdp3430_console_init);
static int sdp3430_mem_init(void)
{
- arm_add_mem_device("ram0", 0x80000000, 128 * 1024 * 1024);
+ omap_add_ram0(SZ_128M);
return 0;
}
diff --git a/arch/arm/boards/omap3evm/board.c b/arch/arm/boards/omap3evm/board.c
index 7d4a87f..dbaa63c 100644
--- a/arch/arm/boards/omap3evm/board.c
+++ b/arch/arm/boards/omap3evm/board.c
@@ -48,6 +48,7 @@
#include <sizes.h>
#include <ns16550.h>
#include <asm/armlinux.h>
+#include <mach/devices.h>
#include <mach/silicon.h>
#include <mach/sdrc.h>
#include <mach/sys_info.h>
@@ -214,11 +215,6 @@ pure_initcall(omap3_evm_board_init);
#ifdef CONFIG_DRIVER_SERIAL_NS16550
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief Initialize the serial port to be used as console.
*
@@ -226,14 +222,11 @@ static struct NS16550_plat serial_plat = {
*/
static int omap3evm_init_console(void)
{
- add_ns16550_device(DEVICE_ID_DYNAMIC,
#if defined(CONFIG_OMAP3EVM_UART1)
- OMAP_UART1_BASE,
+ omap_add_ns16550(OMAP_UART1_BASE);
#elif defined(CONFIG_OMAP3EVM_UART3)
- OMAP_UART3_BASE,
+ omap_add_ns16550(OMAP_UART3_BASE);
#endif
- 1024, IORESOURCE_MEM_8BIT, &serial_plat);
-
return 0;
}
console_initcall(omap3evm_init_console);
@@ -241,7 +234,7 @@ console_initcall(omap3evm_init_console);
static int omap3evm_mem_init(void)
{
- arm_add_mem_device("ram0", 0x80000000, 128 * 1024 * 1024);
+ omap_add_ram0(SZ_128M);
return 0;
}
@@ -256,8 +249,7 @@ static int omap3evm_init_devices(void)
gpmc_generic_init(0x10);
#endif
#ifdef CONFIG_MCI_OMAP_HSMMC
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap_add_mmc(OMAP_MMC1_BASE, NULL);
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_OMAP3EVM);
diff --git a/arch/arm/boards/panda/board.c b/arch/arm/boards/panda/board.c
index 98c05b2..7f3f430 100644
--- a/arch/arm/boards/panda/board.c
+++ b/arch/arm/boards/panda/board.c
@@ -19,6 +19,7 @@
#include <asm/mmu.h>
#include <mach/gpio.h>
#include <environment.h>
+#include <mach/devices.h>
#include <mach/xload.h>
#include <i2c/i2c.h>
#include <gpio.h>
@@ -33,16 +34,10 @@ static int board_revision;
#define GPIO_BOARD_ID1 101
#define GPIO_BOARD_ID2 171
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
static int panda_console_init(void)
{
/* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART3_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap_add_ns16550(OMAP44XX_UART3_BASE);
return 0;
}
@@ -50,7 +45,7 @@ console_initcall(panda_console_init);
static int panda_mem_init(void)
{
- arm_add_mem_device("ram0", 0x80000000, SZ_1G);
+ omap_add_ram0(SZ_1G);
return 0;
}
@@ -160,13 +155,9 @@ static int panda_devices_init(void)
}
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC,
- NULL, 0x48070000, 0x1000,
- IORESOURCE_MEM, NULL);
-
+ omap_add_i2c(0x48070000, NULL);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap_add_mmc(0x4809C100, NULL);
panda_ehci_init();
panda_led_init();
diff --git a/arch/arm/boards/pcm049/board.c b/arch/arm/boards/pcm049/board.c
index 3159457..aa20ff1 100644
--- a/arch/arm/boards/pcm049/board.c
+++ b/arch/arm/boards/pcm049/board.c
@@ -32,22 +32,17 @@
#include <partition.h>
#include <nand.h>
#include <asm/mmu.h>
+#include <mach/devices.h>
#include <mach/gpio.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
#include <mach/xload.h>
#include <i2c/i2c.h>
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
static int pcm049_console_init(void)
{
/* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART3_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap_add_ns16550(OMAP44XX_UART3_BASE);
return 0;
}
@@ -55,10 +50,10 @@ console_initcall(pcm049_console_init);
static int pcm049_mem_init(void)
{
- arm_add_mem_device("ram0", 0x80000000, SZ_512M);
+ omap_add_ram0(SZ_512M);
+
+ omap_add_sram0(0x40300000, 48 * SZ_1K);
- add_mem_device("sram0", 0x40300000, 48 * 1024,
- IORESOURCE_MEM_WRITEABLE);
return 0;
}
mem_initcall(pcm049_mem_init);
@@ -99,11 +94,9 @@ static struct gpmc_nand_platform_data nand_plat = {
static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, 0x48070000, 0x1000,
- IORESOURCE_MEM, NULL);
+ omap_add_i2c(0x48070000, NULL);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
- IORESOURCE_MEM, NULL);
+ omap_add_mmc(0x4809C100, NULL);
gpmc_generic_init(0x10);
diff --git a/arch/arm/boards/phycard-a-l1/pca-a-l1.c b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
index f2d10f2..a934057 100644
--- a/arch/arm/boards/phycard-a-l1/pca-a-l1.c
+++ b/arch/arm/boards/phycard-a-l1/pca-a-l1.c
@@ -57,6 +57,7 @@
#include <generated/mach-types.h>
#include <linux/err.h>
#include <mach/control.h>
+#include <mach/devices.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
#include <mach/omap_hsmmc.h>
@@ -308,14 +309,6 @@ static int pcaal1_board_init(void)
}
pure_initcall(pcaal1_board_init);
-/*
- * Run-time initialization(s)
- */
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
/**
* @brief Initialize the serial port to be used as console.
*
@@ -323,8 +316,7 @@ static struct NS16550_plat serial_plat = {
*/
static int pcaal1_init_console(void)
{
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP_UART3_BASE, 1024, IORESOURCE_MEM_8BIT,
- &serial_plat);
+ omap_add_ns16550(OMAP_UART3_BASE);
return 0;
}
@@ -366,10 +358,9 @@ static int pcaal1_mem_init(void)
*/
gpmc_generic_init(0x10);
#endif
- add_mem_device("sram0", OMAP_SRAM_BASE, 60 * SZ_1K,
- IORESOURCE_MEM_WRITEABLE);
+ omap_add_sram0(OMAP_SRAM_BASE, 60 * SZ_1K);
- arm_add_mem_device("ram0", OMAP_SDRC_CS0, get_sdr_cs_size(SDRC_CS0_OSET));
+ omap_add_ram0(get_sdr_cs_size(SDRC_CS0_OSET));
printf("found %s at SDCS0\n", size_human_readable(get_sdr_cs_size(SDRC_CS0_OSET)));
if ((get_sdr_cs_size(SDRC_CS1_OSET) != 0) && (get_sdr_cs1_base() != OMAP_SDRC_CS0)) {
@@ -398,8 +389,7 @@ static int pcaal1_init_devices(void)
omap_add_gpmc_nand_device(&nand_plat);
#ifdef CONFIG_MCI_OMAP_HSMMC
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, OMAP_MMC1_BASE, SZ_4K,
- IORESOURCE_MEM, &pcaal1_hsmmc_plat);
+ omap_add_mmc(OMAP_MMC1_BASE, &pcaal1_hsmmc_plat);
#endif
#ifdef CONFIG_DRIVER_NET_SMC911X
diff --git a/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c b/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
index 64e6d94..12d118b 100644
--- a/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
+++ b/arch/arm/boards/phycard-a-xl2/pca-a-xl2.c
@@ -32,6 +32,7 @@
#include <partition.h>
#include <nand.h>
#include <asm/mmu.h>
+#include <mach/devices.h>
#include <mach/gpio.h>
#include <mach/gpmc.h>
#include <mach/gpmc_nand.h>
@@ -39,16 +40,10 @@
#include <mach/omap_hsmmc.h>
#include <i2c/i2c.h>
-static struct NS16550_plat serial_plat = {
- .clock = 48000000, /* 48MHz (APLL96/2) */
- .shift = 2,
-};
-
static int pcaaxl2_console_init(void)
{
/* Register the serial port */
- add_ns16550_device(DEVICE_ID_DYNAMIC, OMAP44XX_UART3_BASE, 1024,
- IORESOURCE_MEM_8BIT, &serial_plat);
+ omap_add_ns16550(OMAP44XX_UART3_BASE);
return 0;
}
@@ -56,10 +51,10 @@ console_initcall(pcaaxl2_console_init);
static int pcaaxl2_mem_init(void)
{
- arm_add_mem_device("ram0", 0x80000000, SZ_512M);
+ omap_add_ram0(SZ_512M);
+
+ omap_add_sram0(0x40300000, 48 * SZ_1K);
- add_mem_device("sram0", 0x40300000, 48 * 1024,
- IORESOURCE_MEM_WRITEABLE);
return 0;
}
mem_initcall(pcaaxl2_mem_init);
@@ -111,16 +106,14 @@ static int pcaaxl2_devices_init(void)
u32 value;
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
- add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, 0x48070000, 0x1000,
- IORESOURCE_MEM, NULL);
+ omap_add_i2c(0x48070000, NULL);
value = readl(OMAP4_CONTROL_PBIASLITE);
value &= ~OMAP4_MMC1_PBIASLITE_VMODE;
value |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ);
writel(value, OMAP4_CONTROL_PBIASLITE);
- add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
- IORESOURCE_MEM, &mmc_device);
+ omap_add_mmc(0x4809C100, &mmc_device);
gpmc_generic_init(0x10);
--
1.7.0.4
More information about the barebox
mailing list