[PATCH 05/10] ARM i.MX25: Enable all needed clocks during startup
Sascha Hauer
s.hauer at pengutronix.de
Wed Oct 10 03:49:33 EDT 2012
On Mon, Oct 08, 2012 at 09:44:14PM +0200, Sascha Hauer wrote:
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
> arch/arm/mach-imx/clk-imx25.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
> index 3b9588c..3a141c2 100644
> --- a/arch/arm/mach-imx/clk-imx25.c
> +++ b/arch/arm/mach-imx/clk-imx25.c
> @@ -76,9 +76,19 @@ static int imx25_ccm_probe(struct device_d *dev)
>
> base = dev_request_mem_region(dev, 0);
>
> - writel(0x10e88578, base + CCM_CGCR0);
> - writel(0x0478e1e0, base + CCM_CGCR0);
> - writel(0x0007c400, base + CCM_CGCR0);
I applied this one to master as I noticed the clk setup was broken, all
values were written to CCM_CGCR0 :(
> + writel((1 << 3) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 8) | (1 << 9) |
> + (1 << 10) | (1 << 15) | (1 << 19) | (1 << 21) | (1 << 22) |
> + (1 << 22) | (1 << 23) | (1 << 24) | (1 << 28),
> + base + CCM_CGCR0);
> +
> + writel((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) | (1 << 13) | (1 << 14) |
> + (1 << 15) | (1 << 19) | (1 << 20) | (1 << 21) | (1 << 22) |
> + (1 << 26) | (1 << 29) | (1 << 31),
> + base + CCM_CGCR1);
> +
> + writel((1 << 0) | (1 << 1) | (1 << 2) | (1 << 10) | (1 << 13) | (1 << 14) |
> + (1 << 15) | (1 << 16) | (1 << 17) | (1 << 18),
> + base + CCM_CGCR2);
>
> clks[dummy] = clk_fixed("dummy", 0);
> clks[osc] = clk_fixed("osc", 24000000);
> --
> 1.7.10.4
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list