[PATCH 2/4] Raspberry-Pi: add defconfig

[Jean-Christophe PLAGNIOL-VILLARD]

HI,

	put this with the board patch

	btw where can we find the datasheet of the SoC

Best Regards,
J.
On 10:47 Fri 05 Oct     , Carlo Caione wrote:
> Signed-off-by: Carlo Caione <carlo.caione at gmail.com>
> ---
>  arch/arm/configs/rpi_defconfig | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 arch/arm/configs/rpi_defconfig
> 
> diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
> new file mode 100644
> index 0000000..de3e186
> --- /dev/null
> +++ b/arch/arm/configs/rpi_defconfig
> @@ -0,0 +1,41 @@
> +CONFIG_ARCH_BCM2835=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PROMPT="R-Pi> "
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_PARTITION=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +CONFIG_CMD_PASSWD=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MTEST=y
> +CONFIG_CMD_MTEST_ALTERNATIVE=y
> +CONFIG_CMD_BOOTM_ZLIB=y
> +CONFIG_CMD_BOOTM_BZLIB=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_SERIAL_AMBA_PL011=y
> +CONFIG_DRIVER_NET_SMC91111=y
> +CONFIG_FS_CRAMFS=y
> +CONFIG_SHA1=y
> +CONFIG_SHA256=y
> \ No newline at end of file
> -- 
> 1.7.12.2
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox