[PATCH] NAND Flash SMC timings update (nwe_pulse) for calao board based on AT91SAM9G20 SoC

[gregory hermant]

Hello sascha,
It's just a typo.
gregory

Sascha Hauer wrote:
> On Tue, Aug 28, 2012 at 08:40:57AM +0200, gregory hermant wrote:
>> Signed-off-by: Gregory Hermant <gregory.hermant at calao-systems.com>
> 
> The commmit log is a bit sparse. It would be interesting if this is an
> enhancement, fixes a problem, is needed on newer board revisions...
> 
> Sascha
> 
>> ---
>>  arch/arm/boards/tny-a926x/init.c |    2 +-
>>  arch/arm/boards/usb-a926x/init.c |    2 +-
>>  2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
>> index d58132a..5538a44 100644
>> --- a/arch/arm/boards/tny-a926x/init.c
>> +++ b/arch/arm/boards/tny-a926x/init.c
>> @@ -89,7 +89,7 @@ static struct sam9_smc_config tny_a9g20_nand_smc_config = {
>>  	.ncs_read_pulse		= 4,
>>  	.nrd_pulse		= 4,
>>  	.ncs_write_pulse	= 4,
>> -	.nwe_pulse		= 2,
>> +	.nwe_pulse		= 4,
>>  
>>  	.read_cycle		= 7,
>>  	.write_cycle		= 7,
>> diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
>> index 7e63876..00a215d 100644
>> --- a/arch/arm/boards/usb-a926x/init.c
>> +++ b/arch/arm/boards/usb-a926x/init.c
>> @@ -90,7 +90,7 @@ static struct sam9_smc_config usb_a9g20_nand_smc_config = {
>>  	.ncs_read_pulse		= 4,
>>  	.nrd_pulse		= 4,
>>  	.ncs_write_pulse	= 4,
>> -	.nwe_pulse		= 2,
>> +	.nwe_pulse		= 4,
>>  
>>  	.read_cycle		= 7,
>>  	.write_cycle		= 7,
>> -- 
>> 1.5.6.3
>>
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
>>
>