[PATCH 5/5] defaultenv-2: add boot sequence

[Sascha Hauer]

On Fri, Aug 24, 2012 at 06:55:13AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Boot will boot run sequentially the script in /env/boot.d
> 
> if not global.boot.defaul or global.boot.defaul == seq
> start the boot sequence
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
>  defaultenv-2/base/bin/boot     |   52 ++++++++++++++++++++++++++++++++++++----
>  defaultenv-2/base/init/general |    2 +-
>  2 files changed, 48 insertions(+), 6 deletions(-)
> 
> diff --git a/defaultenv-2/base/bin/boot b/defaultenv-2/base/bin/boot
> index 103eb87..ade555d 100644
> --- a/defaultenv-2/base/bin/boot
> +++ b/defaultenv-2/base/bin/boot
> @@ -2,20 +2,39 @@
>  
>  verbose=
>  dryrun=
> +sequence=
>  
>  usage="
>  $0 [OPTIONS] [source]\n
>   -v  verbose\n
>   -d  dryrun\n
>   -l  list boot sources\n
> + -s  start boot sequence in /env/boot.d/\n

I think there should not be a dedicated option for this. Instead, it
should by default start the boot sequence. global.boot.default could
then be dropped.

Sascha


>   -h  help"
>  
> +if [ ${global.allow_color} = "true" ]; then
> +	. /env/data/ansi-colors
> +	ECHO=-e
> +fi
> +
>  for i in /env/boot/*; do
>  	basename $i s
>  	sources="$sources$s "
>  done
>  
> -while getopt "vdhl" opt; do
> +if [ -d /env/boot.d ]; then
> +	sources="$sources\nboot sequence:"
> +	for i in /env/boot.d/*; do
> +		readlink -f $i s
> +		basename $s link
> +		basename $i s
> +		sources="$sources\n $s -> $link"
> +	done
> +else
> +	sources="$sources\nboot sequence:\nnone"
> +fi
> +
> +while getopt "vdhls" opt; do
>  	if [ ${opt} = v ]; then
>  		if [ -n "$verbose" ]; then
>  			verbose="-v -v"
> @@ -23,7 +42,9 @@ while getopt "vdhl" opt; do
>  			verbose="-v"
>  		fi
>  	elif [ ${opt} = d ]; then
> -		dryrun=1
> +		dryrun="-d"
> +	elif [ ${opt} = s ]; then
> +		sequence=1
>  	elif [ ${opt} = l ]; then
>  		echo -e "boot sources:\n$sources"
>  		exit 0
> @@ -43,12 +64,33 @@ else
>  	scr="$1"
>  fi
>  
> +if [ -n "$sequence" -o "x$src" = "xseq" ]; then
> +	if [ ! -d /env/boot.d ]; then
> +		echo ${ECHO} "${GREEN}boot sequence ${RED}none${NC}"
> +		exit 1
> +	fi
> +	echo ${ECHO} "${GREEN}Start boot sequence${NC}"
> +	for i in /env/boot.d/*; do
> +		readlink -f $i s
> +		basename $s link
> +		basename $i s
> +		msg="${GREEN}boot${NC} ${YELLOW}${s}${NC} -> ${CYAN}${link}${NC}"
> +		echo ${ECHO} "${msg}"
> +		boot $dryrun $s
> +		echo ${ECHO} "${msg} ${RED}failled${NC}"
> +		ret=$?
> +	done
> +	echo ${ECHO} "${GREEN}boot sequence ${RED}failled${NC}"
> +	exit $ret
> +fi
> +
>  if [ -n "$scr" ]; then
> -	if [ ! -f /env/boot/$scr ]; then
> -		echo -e "/env/boot/$scr does not exist.Valid choices:\n$sources"
> +	if [ ! -f /env/boot.d/$scr -a ! -f /env/boot/$scr ]; then
> +		echo -e "/env/boot/$scr or /env/boot.d/$scr does not exist.Valid choices:\n$sources"
>  		exit
>  	fi
> -	/env/boot/$scr
> +	[ -f /env/boot.d/$scr ] && /env/boot.d/$scr
> +	[ -f /env/boot/$scr ] && /env/boot/$scr
>  fi
>  
>  if [ -n "$dryrun" ]; then
> diff --git a/defaultenv-2/base/init/general b/defaultenv-2/base/init/general
> index 98a92d1..2c0bd74 100644
> --- a/defaultenv-2/base/init/general
> +++ b/defaultenv-2/base/init/general
> @@ -11,5 +11,5 @@ global.user=sha
>  # timeout in seconds before the default boot entry is started
>  global.autoboot_timeout=3
>  
> -# default boot entry (one of /env/boot/*)
> +# default boot entry (one of /env/boot/*) or seq to start the sequence
>  global.boot.default=net
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |