[for master PATCH 1/2] miidev: add phy_addr detection support
Sascha Hauer
s.hauer at pengutronix.de
Tue Aug 14 15:58:54 EDT 2012
On Tue, Aug 14, 2012 at 05:48:55PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> export via param the phy_addr and the phy_id detected
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
> Hi,
>
> this is need to fix the calao board support since the introduction of
> the gigabit phy detection support
Can you explain what this has to do with gigabit support?
Sascha
>
> Best Regards,
> J.
> drivers/net/miidev.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++----
> include/miidev.h | 2 ++
> 2 files changed, 72 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> index b49944b..ab1811d 100644
> --- a/drivers/net/miidev.c
> +++ b/drivers/net/miidev.c
> @@ -236,18 +236,82 @@ static struct file_operations miidev_ops = {
> .lseek = dev_lseek_default,
> };
>
> +static int get_phy_id(struct mii_device *mdev, int phy_addr,
> + uint32_t *phy_id)
> +{
> + int val;
> +
> + val = mii_read(mdev, phy_addr, MII_PHYSID1);
> + if (val < 0)
> + return -EIO;
> + *phy_id = (val & 0xffff) << 16;
> + val = mii_read(mdev, phy_addr, MII_PHYSID2);
> + if (val < 0)
> + return -EIO;
> + *phy_id |= (val & 0xffff);
> +
> + return 0;
> +}
> +
> +static int phy_detect_one(struct mii_device *mdev, int phy_addr,
> + uint32_t *phy_id)
> +{
> + uint32_t _phy_id;
> + int ret;
> +
> + ret = get_phy_id(mdev, phy_addr, &_phy_id);
> +
> + if (ret)
> + return ret;
> +
> + /* If the phy_id is mostly Fs, there is no device there */
> + if ((_phy_id & 0x1fffffff) == 0x1fffffff)
> + return -EIO;
> +
> + *phy_id = _phy_id;
> +
> + return 0;
> +}
> +
> +static int phy_detect(struct mii_device *mdev)
> +{
> + int phy_addr;
> +
> + for (phy_addr = 0; phy_addr <= 0x1f; phy_addr++) {
> + if (!phy_detect_one(mdev, phy_addr, &mdev->phy_id))
> + return phy_addr;
> + }
> +
> + return -EIO;
> +}
> +
> static int miidev_probe(struct device_d *dev)
> {
> struct mii_device *mdev = dev->priv;
> int val;
> int caps = 0;
> + char str[11];
> +
> + if (mdev->address < 0) {
> + int phy_addr;
> +
> + phy_addr = phy_detect(mdev);
> +
> + if (phy_addr < 0) {
> + dev_err(dev, "cannot detect PHY\n");
> + return -ENODEV;
> + }
> + mdev->address = phy_addr;
> + } else {
> + if (phy_detect_one(mdev, mdev->address, &mdev->phy_id) < 0)
> + goto err_out;
> + }
> +
> + sprintf(str, "%u", mdev->address);
> + dev_add_param_fixed(dev, "phy_addr", str);
> + sprintf(str, "0x%08x", mdev->phy_id);
> + dev_add_param_fixed(dev, "phy_id", str);
>
> - val = mii_read(mdev, mdev->address, MII_PHYSID1);
> - if (val < 0 || val == 0xffff)
> - goto err_out;
> - val = mii_read(mdev, mdev->address, MII_PHYSID2);
> - if (val < 0 || val == 0xffff)
> - goto err_out;
> val = mii_read(mdev, mdev->address, MII_BMSR);
> if (val < 0)
> goto err_out;
> diff --git a/include/miidev.h b/include/miidev.h
> index 4bbf94c..2f39234 100644
> --- a/include/miidev.h
> +++ b/include/miidev.h
> @@ -38,6 +38,8 @@ struct mii_device {
> struct device_d *parent;
>
> int address; /* The address the phy has on the bus */
> + uint32_t phy_id; /* The phy id */
> +
> int (*read) (struct mii_device *dev, int addr, int reg);
> int (*write) (struct mii_device *dev, int addr, int reg, int value);
>
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list