[PATCH 1/7] smc911x: move register define to smc911x.h
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Tue Aug 14 13:32:14 EDT 2012
this make the driver more readable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
drivers/net/smc911x.c | 329 +--------------------------
drivers/net/{smc911x.c => smc911x.h} | 406 ----------------------------------
2 files changed, 2 insertions(+), 733 deletions(-)
copy drivers/net/{smc911x.c => smc911x.h} (60%)
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 7dddbbc..9c488c7 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -38,334 +38,9 @@
#include <clock.h>
#include <io.h>
-#define AS CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT
-/* Below are the register offsets and bit definitions
- * of the Lan911x memory space
- */
-#define RX_DATA_FIFO (0x00 << AS)
-
-#define TX_DATA_FIFO (0x20 << AS)
-#define TX_CMD_A_INT_ON_COMP 0x80000000
-#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000
-#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000
-#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000
-#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000
-#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000
-#define TX_CMD_A_INT_FIRST_SEG 0x00002000
-#define TX_CMD_A_INT_LAST_SEG 0x00001000
-#define TX_CMD_A_BUF_SIZE 0x000007FF
-#define TX_CMD_B_PKT_TAG 0xFFFF0000
-#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000
-#define TX_CMD_B_DISABLE_PADDING 0x00001000
-#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF
-
-#define RX_STATUS_FIFO (0x40 << AS)
-#define RX_STS_PKT_LEN 0x3FFF0000
-#define RX_STS_ES 0x00008000
-#define RX_STS_BCST 0x00002000
-#define RX_STS_LEN_ERR 0x00001000
-#define RX_STS_RUNT_ERR 0x00000800
-#define RX_STS_MCAST 0x00000400
-#define RX_STS_TOO_LONG 0x00000080
-#define RX_STS_COLL 0x00000040
-#define RX_STS_ETH_TYPE 0x00000020
-#define RX_STS_WDOG_TMT 0x00000010
-#define RX_STS_MII_ERR 0x00000008
-#define RX_STS_DRIBBLING 0x00000004
-#define RX_STS_CRC_ERR 0x00000002
-#define RX_STATUS_FIFO_PEEK (0x44 << AS)
-#define TX_STATUS_FIFO (0x48 << AS)
-#define TX_STS_TAG 0xFFFF0000
-#define TX_STS_ES 0x00008000
-#define TX_STS_LOC 0x00000800
-#define TX_STS_NO_CARR 0x00000400
-#define TX_STS_LATE_COLL 0x00000200
-#define TX_STS_MANY_COLL 0x00000100
-#define TX_STS_COLL_CNT 0x00000078
-#define TX_STS_MANY_DEFER 0x00000004
-#define TX_STS_UNDERRUN 0x00000002
-#define TX_STS_DEFERRED 0x00000001
-#define TX_STATUS_FIFO_PEEK (0x4C << AS)
-#define ID_REV (0x50 << AS)
-#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */
-#define ID_REV_REV_ID 0x0000FFFF /* RO */
-
-#define INT_CFG (0x54 << AS)
-#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */
-#define INT_CFG_INT_DEAS_CLR 0x00004000
-#define INT_CFG_INT_DEAS_STS 0x00002000
-#define INT_CFG_IRQ_INT 0x00001000 /* RO */
-#define INT_CFG_IRQ_EN 0x00000100 /* R/W */
-#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */
-#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */
-
-#define INT_STS (0x58 << AS)
-#define INT_STS_SW_INT 0x80000000 /* R/WC */
-#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */
-#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */
-#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */
-#define INT_STS_RXDF_INT 0x00400000 /* R/WC */
-#define INT_STS_TX_IOC 0x00200000 /* R/WC */
-#define INT_STS_RXD_INT 0x00100000 /* R/WC */
-#define INT_STS_GPT_INT 0x00080000 /* R/WC */
-#define INT_STS_PHY_INT 0x00040000 /* RO */
-#define INT_STS_PME_INT 0x00020000 /* R/WC */
-#define INT_STS_TXSO 0x00010000 /* R/WC */
-#define INT_STS_RWT 0x00008000 /* R/WC */
-#define INT_STS_RXE 0x00004000 /* R/WC */
-#define INT_STS_TXE 0x00002000 /* R/WC */
-//#define INT_STS_ERX 0x00001000 /* R/WC */
-#define INT_STS_TDFU 0x00000800 /* R/WC */
-#define INT_STS_TDFO 0x00000400 /* R/WC */
-#define INT_STS_TDFA 0x00000200 /* R/WC */
-#define INT_STS_TSFF 0x00000100 /* R/WC */
-#define INT_STS_TSFL 0x00000080 /* R/WC */
-//#define INT_STS_RXDF 0x00000040 /* R/WC */
-#define INT_STS_RDFO 0x00000040 /* R/WC */
-#define INT_STS_RDFL 0x00000020 /* R/WC */
-#define INT_STS_RSFF 0x00000010 /* R/WC */
-#define INT_STS_RSFL 0x00000008 /* R/WC */
-#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */
-#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */
-#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */
-#define INT_EN (0x5C << AS)
-#define INT_EN_SW_INT_EN 0x80000000 /* R/W */
-#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */
-#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */
-#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */
-//#define INT_EN_RXDF_INT_EN 0x00400000 /* R/W */
-#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */
-#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */
-#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */
-#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */
-#define INT_EN_PME_INT_EN 0x00020000 /* R/W */
-#define INT_EN_TXSO_EN 0x00010000 /* R/W */
-#define INT_EN_RWT_EN 0x00008000 /* R/W */
-#define INT_EN_RXE_EN 0x00004000 /* R/W */
-#define INT_EN_TXE_EN 0x00002000 /* R/W */
-//#define INT_EN_ERX_EN 0x00001000 /* R/W */
-#define INT_EN_TDFU_EN 0x00000800 /* R/W */
-#define INT_EN_TDFO_EN 0x00000400 /* R/W */
-#define INT_EN_TDFA_EN 0x00000200 /* R/W */
-#define INT_EN_TSFF_EN 0x00000100 /* R/W */
-#define INT_EN_TSFL_EN 0x00000080 /* R/W */
-//#define INT_EN_RXDF_EN 0x00000040 /* R/W */
-#define INT_EN_RDFO_EN 0x00000040 /* R/W */
-#define INT_EN_RDFL_EN 0x00000020 /* R/W */
-#define INT_EN_RSFF_EN 0x00000010 /* R/W */
-#define INT_EN_RSFL_EN 0x00000008 /* R/W */
-#define INT_EN_GPIO2_INT 0x00000004 /* R/W */
-#define INT_EN_GPIO1_INT 0x00000002 /* R/W */
-#define INT_EN_GPIO0_INT 0x00000001 /* R/W */
-
-#define BYTE_TEST (0x64 << AS)
-#define FIFO_INT (0x68 << AS)
-#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */
-#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */
-#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */
-#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */
-
-#define RX_CFG (0x6C << AS)
-#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */
-#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */
-#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */
-#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */
-#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */
-#define RX_CFG_RX_DUMP 0x00008000 /* R/W */
-#define RX_CFG_RXDOFF 0x00001F00 /* R/W */
-//#define RX_CFG_RXBAD 0x00000001 /* R/W */
-
-#define TX_CFG (0x70 << AS)
-//#define TX_CFG_TX_DMA_LVL 0xE0000000 /* R/W */
-//#define TX_CFG_TX_DMA_CNT 0x0FFF0000 /* R/W Self Clearing */
-#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */
-#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */
-#define TX_CFG_TXSAO 0x00000004 /* R/W */
-#define TX_CFG_TX_ON 0x00000002 /* R/W */
-#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */
-
-#define HW_CFG (0x74 << AS)
-#define HW_CFG_TTM 0x00200000 /* R/W */
-#define HW_CFG_SF 0x00100000 /* R/W */
-#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */
-#define HW_CFG_TR 0x00003000 /* R/W */
-#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */
-#define HW_CFG_SMI_SEL 0x00000010 /* R/W */
-#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */
-#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */
-#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */
-#define HW_CFG_SRST_TO 0x00000002 /* RO */
-#define HW_CFG_SRST 0x00000001 /* Self Clearing */
-
-#define RX_DP_CTRL (0x78 << AS)
-#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */
-#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */
-
-#define RX_FIFO_INF (0x7C << AS)
-#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */
-#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */
-
-#define TX_FIFO_INF (0x80 << AS)
-#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */
-#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */
-
-#define PMT_CTRL (0x84 << AS)
-#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */
-#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */
-#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */
-#define PMT_CTRL_ED_EN 0x00000100 /* R/W */
-#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */
-#define PMT_CTRL_WUPS 0x00000030 /* R/WC */
-#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */
-#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */
-#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */
-#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */
-#define PMT_CTRL_PME_IND 0x00000008 /* R/W */
-#define PMT_CTRL_PME_POL 0x00000004 /* R/W */
-#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */
-#define PMT_CTRL_READY 0x00000001 /* RO */
-
-#define GPIO_CFG (0x88 << AS)
-#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */
-#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */
-#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */
-#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */
-#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */
-#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */
-#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */
-#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */
-#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */
-#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */
-#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */
-#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */
-#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */
-#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */
-#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */
-#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */
-#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */
-#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */
-
-#define GPT_CFG (0x8C << AS)
-#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */
-#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */
-
-#define GPT_CNT (0x90 << AS)
-#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */
-
-#define ENDIAN (0x98 << AS)
-#define FREE_RUN (0x9C << AS)
-#define RX_DROP (0xA0 << AS)
-#define MAC_CSR_CMD (0xA4 << AS)
-#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */
-#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */
-#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */
-
-#define MAC_CSR_DATA (0xA8 << AS)
-#define AFC_CFG (0xAC << AS)
-#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */
-#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */
-#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */
-#define AFC_CFG_FCMULT 0x00000008 /* R/W */
-#define AFC_CFG_FCBRD 0x00000004 /* R/W */
-#define AFC_CFG_FCADD 0x00000002 /* R/W */
-#define AFC_CFG_FCANY 0x00000001 /* R/W */
-
-#define E2P_CMD (0xB0 << AS)
-#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */
-#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */
-#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */
-#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */
-#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */
-#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */
-#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */
-#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */
-#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */
-#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */
-#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */
-#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */
-#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */
-
-#define E2P_DATA (0xB4 << AS)
-#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */
-/* end of LAN register offsets and bit definitions */
-
-/* MAC Control and Status registers */
-#define MAC_CR 0x01 /* R/W */
-
-/* MAC_CR - MAC Control Register */
-#define MAC_CR_RXALL 0x80000000
-// TODO: delete this bit? It is not described in the data sheet.
-#define MAC_CR_HBDIS 0x10000000
-#define MAC_CR_RCVOWN 0x00800000
-#define MAC_CR_LOOPBK 0x00200000
-#define MAC_CR_FDPX 0x00100000
-#define MAC_CR_MCPAS 0x00080000
-#define MAC_CR_PRMS 0x00040000
-#define MAC_CR_INVFILT 0x00020000
-#define MAC_CR_PASSBAD 0x00010000
-#define MAC_CR_HFILT 0x00008000
-#define MAC_CR_HPFILT 0x00002000
-#define MAC_CR_LCOLL 0x00001000
-#define MAC_CR_BCAST 0x00000800
-#define MAC_CR_DISRTY 0x00000400
-#define MAC_CR_PADSTR 0x00000100
-#define MAC_CR_BOLMT_MASK 0x000000C0
-#define MAC_CR_DFCHK 0x00000020
-#define MAC_CR_TXEN 0x00000008
-#define MAC_CR_RXEN 0x00000004
-
-#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */
-#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */
-#define HASHH 0x04 /* R/W */
-#define HASHL 0x05 /* R/W */
-
-#define MII_ACC 0x06 /* R/W */
-#define MII_ACC_PHY_ADDR 0x0000F800
-#define MII_ACC_MIIRINDA 0x000007C0
-#define MII_ACC_MII_WRITE 0x00000002
-#define MII_ACC_MII_BUSY 0x00000001
-
-#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */
-
-#ifdef FLOW
-#undef FLOW /* clashed with include/asm/cpu/defBF561.h:1654 */
-#endif
-
-#define FLOW 0x08 /* R/W */
-#define FLOW_FCPT 0xFFFF0000
-#define FLOW_FCPASS 0x00000004
-#define FLOW_FCEN 0x00000002
-#define FLOW_FCBSY 0x00000001
-
-#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */
-#define VLAN1_VTI1 0x0000ffff
-
-#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */
-#define VLAN2_VTI2 0x0000ffff
-
-#define WUFF 0x0B /* WO */
-
-#define WUCSR 0x0C /* R/W */
-#define WUCSR_GUE 0x00000200
-#define WUCSR_WUFR 0x00000040
-#define WUCSR_MPR 0x00000020
-#define WUCSR_WAKE_EN 0x00000004
-#define WUCSR_MPEN 0x00000002
-
-/* Chip ID values */
-#define CHIP_9115 0x115
-#define CHIP_9116 0x116
-#define CHIP_9117 0x117
-#define CHIP_9118 0x118
-#define CHIP_9215 0x115a
-#define CHIP_9216 0x116a
-#define CHIP_9217 0x117a
-#define CHIP_9218 0x118a
-#define CHIP_9221 0x9221
+#define AS CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT
+#include "smc911x.h"
struct smc911x_priv {
struct eth_device edev;
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.h
similarity index 60%
copy from drivers/net/smc911x.c
copy to drivers/net/smc911x.h
index 7dddbbc..68f6590 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.h
@@ -22,24 +22,6 @@
* MA 02111-1307 USA
*/
-#ifdef CONFIG_ENABLE_DEVICE_NOISE
-# define DEBUG
-#endif
-
-#include <common.h>
-
-#include <command.h>
-#include <net.h>
-#include <miidev.h>
-#include <malloc.h>
-#include <init.h>
-#include <xfuncs.h>
-#include <errno.h>
-#include <clock.h>
-#include <io.h>
-
-#define AS CONFIG_DRIVER_NET_SMC911X_ADDRESS_SHIFT
-
/* Below are the register offsets and bit definitions
* of the Lan911x memory space
*/
@@ -367,392 +349,4 @@
#define CHIP_9218 0x118a
#define CHIP_9221 0x9221
-struct smc911x_priv {
- struct eth_device edev;
- struct mii_device miidev;
- void __iomem *base;
-};
-
-struct chip_id {
- u16 id;
- char *name;
-};
-
-static const struct chip_id chip_ids[] = {
- { CHIP_9115, "LAN9115" },
- { CHIP_9116, "LAN9116" },
- { CHIP_9117, "LAN9117" },
- { CHIP_9118, "LAN9118" },
- { CHIP_9215, "LAN9215" },
- { CHIP_9216, "LAN9216" },
- { CHIP_9217, "LAN9217" },
- { CHIP_9218, "LAN9218" },
- { CHIP_9221, "LAN9221" },
- { 0, NULL },
-};
-
-#define DRIVERNAME "smc911x"
-
-static int smc911x_mac_wait_busy(struct smc911x_priv *priv)
-{
- uint64_t start = get_time_ns();
-
- while (!is_timeout(start, MSECOND)) {
- if (!(readl(priv->base + MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY))
- return 0;
- }
-
- printf("%s: mac timeout\n", __FUNCTION__);
- return -1;
-}
-
-static u32 smc911x_get_mac_csr(struct eth_device *edev, u8 reg)
-{
- struct smc911x_priv *priv = edev->priv;
- ulong val;
-
- smc911x_mac_wait_busy(priv);
-
- writel(MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg,
- priv->base + MAC_CSR_CMD);
-
- smc911x_mac_wait_busy(priv);
-
- val = readl(priv->base + MAC_CSR_DATA);
-
- return val;
-}
-
-static void smc911x_set_mac_csr(struct eth_device *edev, u8 reg, u32 data)
-{
- struct smc911x_priv *priv = edev->priv;
-
- smc911x_mac_wait_busy(priv);
-
- writel(data, priv->base + MAC_CSR_DATA);
- writel(MAC_CSR_CMD_CSR_BUSY | reg, priv->base + MAC_CSR_CMD);
-
- smc911x_mac_wait_busy(priv);
-}
-
-static int smc911x_get_ethaddr(struct eth_device *edev, unsigned char *m)
-{
- unsigned long addrh, addrl;
-
- addrh = smc911x_get_mac_csr(edev, ADDRH);
- addrl = smc911x_get_mac_csr(edev, ADDRL);
-
- m[0] = (addrl ) & 0xff;
- m[1] = (addrl >> 8 ) & 0xff;
- m[2] = (addrl >> 16 ) & 0xff;
- m[3] = (addrl >> 24 ) & 0xff;
- m[4] = (addrh ) & 0xff;
- m[5] = (addrh >> 8 ) & 0xff;
-
- /* we get 0xff when there is no eeprom connected */
- if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff)
- return -1;
-
- return 0;
-}
-
-static int smc911x_set_ethaddr(struct eth_device *edev, unsigned char *m)
-{
- unsigned long addrh, addrl;
-
- addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
- addrh = m[4] | m[5] << 8;
- smc911x_set_mac_csr(edev, ADDRH, addrh);
- smc911x_set_mac_csr(edev, ADDRL, addrl);
-
- return 0;
-}
-
-static int smc911x_phy_read(struct mii_device *mdev, int phy_addr, int reg)
-{
- struct eth_device *edev = mdev->edev;
-
- while (smc911x_get_mac_csr(edev, MII_ACC) & MII_ACC_MII_BUSY);
-
- smc911x_set_mac_csr(edev, MII_ACC, phy_addr << 11 | reg << 6 |
- MII_ACC_MII_BUSY);
-
- while (smc911x_get_mac_csr(edev, MII_ACC) & MII_ACC_MII_BUSY);
-
- return smc911x_get_mac_csr(edev, MII_DATA);
-}
-
-static int smc911x_phy_write(struct mii_device *mdev, int phy_addr,
- int reg, int val)
-{
- struct eth_device *edev = mdev->edev;
-
- while (smc911x_get_mac_csr(edev, MII_ACC) & MII_ACC_MII_BUSY);
-
- smc911x_set_mac_csr(edev, MII_DATA, val);
- smc911x_set_mac_csr(edev, MII_ACC,
- phy_addr << 11 | reg << 6 | MII_ACC_MII_BUSY |
- MII_ACC_MII_WRITE);
-
- while (smc911x_get_mac_csr(edev, MII_ACC) & MII_ACC_MII_BUSY);
-
- return 0;
-}
-
-static int smc911x_phy_reset(struct eth_device *edev)
-{
- struct smc911x_priv *priv = edev->priv;
- u32 reg;
-
- reg = readl(priv->base + PMT_CTRL);
- reg &= 0xfcf;
- reg |= PMT_CTRL_PHY_RST;
- writel(reg, priv->base + PMT_CTRL);
-
- mdelay(100);
-
- return 0;
-}
-
-static void smc911x_reset(struct eth_device *edev)
-{
- struct smc911x_priv *priv = edev->priv;
- uint64_t start;
-
- /* Take out of PM setting first */
- if (readl(priv->base + PMT_CTRL) & PMT_CTRL_READY) {
- /* Write to the bytetest will take out of powerdown */
- writel(0, priv->base + BYTE_TEST);
-
- start = get_time_ns();
- while(1) {
- if ((readl(priv->base + PMT_CTRL) & PMT_CTRL_READY))
- break;
- if (is_timeout(start, 100 * USECOND)) {
- dev_err(&edev->dev,
- "timeout waiting for PM restore\n");
- return;
- }
- }
- }
-
- /* Disable interrupts */
- writel(0, priv->base + INT_EN);
-
- writel(HW_CFG_SRST, priv->base + HW_CFG);
-
- start = get_time_ns();
- while(1) {
- if (!(readl(priv->base + E2P_CMD) & E2P_CMD_EPC_BUSY))
- break;
- if (is_timeout(start, 10 * MSECOND)) {
- dev_err(&edev->dev, "reset timeout\n");
- return;
- }
- }
-
- /* Reset the FIFO level and flow control settings */
- smc911x_set_mac_csr(edev, FLOW, FLOW_FCPT | FLOW_FCEN);
-
- writel(0x0050287F, priv->base + AFC_CFG);
-
- /* Set to LED outputs */
- writel(0x70070000, priv->base + GPIO_CFG);
-}
-
-static void smc911x_enable(struct eth_device *edev)
-{
- struct smc911x_priv *priv = edev->priv;
-
- /* Enable TX */
- writel(8 << 16 | HW_CFG_SF, priv->base + HW_CFG);
-
- writel(GPT_CFG_TIMER_EN | 10000, priv->base + GPT_CFG);
-
- writel(TX_CFG_TX_ON, priv->base + TX_CFG);
-
- /* no padding to start of packets */
- writel(RX_CFG_RX_DUMP, priv->base + RX_CFG);
-}
-
-static int smc911x_eth_open(struct eth_device *edev)
-{
- struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv;
-
- miidev_wait_aneg(&priv->miidev);
- miidev_print_status(&priv->miidev);
-
- /* Turn on Tx + Rx */
- smc911x_enable(edev);
- return 0;
-}
-
-static int smc911x_eth_send(struct eth_device *edev, void *packet, int length)
-{
- struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv;
- u32 *data = (u32*)packet;
- u32 tmplen;
- u32 status;
- uint64_t start;
-
- writel(TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length,
- priv->base + TX_DATA_FIFO);
- writel(length, priv->base + TX_DATA_FIFO);
-
- tmplen = (length + 3) / 4;
-
- while(tmplen--)
- writel(*data++, priv->base + TX_DATA_FIFO);
-
- /* wait for transmission */
- start = get_time_ns();
- while (1) {
- if ((readl(priv->base + TX_FIFO_INF) &
- TX_FIFO_INF_TSUSED) >> 16)
- break;
- if (is_timeout(start, 100 * MSECOND)) {
- dev_err(&edev->dev, "TX timeout\n");
- return -1;
- }
- }
-
- /* get status. Ignore 'no carrier' error, it has no meaning for
- * full duplex operation
- */
- status = readl(priv->base + TX_STATUS_FIFO) & (TX_STS_LOC |
- TX_STS_LATE_COLL | TX_STS_MANY_COLL | TX_STS_MANY_DEFER |
- TX_STS_UNDERRUN);
-
- if(!status)
- return 0;
-
- dev_err(&edev->dev, "failed to send packet: %s%s%s%s%s\n",
- status & TX_STS_LOC ? "TX_STS_LOC " : "",
- status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
- status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
- status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
- status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
-
- return -1;
-}
-
-static void smc911x_eth_halt(struct eth_device *edev)
-{
- struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv;
-
- /* Disable TX */
- writel(TX_CFG_STOP_TX, priv->base + TX_CFG);
-
-// smc911x_reset(edev);
-}
-
-static int smc911x_eth_rx(struct eth_device *edev)
-{
- struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv;
- u32 *data = (u32 *)NetRxPackets[0];
- u32 pktlen, tmplen;
- u32 status;
-
- if((readl(priv->base + RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) {
- status = readl(priv->base + RX_STATUS_FIFO);
- pktlen = (status & RX_STS_PKT_LEN) >> 16;
-
- writel(0, priv->base + RX_CFG);
-
- tmplen = (pktlen + 2 + 3) / 4;
- while(tmplen--)
- *data++ = readl(priv->base + RX_DATA_FIFO);
-
- if(status & RX_STS_ES)
- dev_err(&edev->dev, "dropped bad packet. Status: 0x%08x\n",
- status);
- else
- net_receive(NetRxPackets[0], pktlen);
- }
-
- return 0;
-}
-
-static int smc911x_init_dev(struct eth_device *edev)
-{
- struct smc911x_priv *priv = (struct smc911x_priv *)edev->priv;
-
- smc911x_set_mac_csr(edev, MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN |
- MAC_CR_HBDIS);
-
- miidev_restart_aneg(&priv->miidev);
-
- return 0;
-}
-
-static int smc911x_probe(struct device_d *dev)
-{
- struct eth_device *edev;
- struct smc911x_priv *priv;
- uint32_t val;
- int i;
- void __iomem *base;
-
- base = dev_request_mem_region(dev, 0);
-
- val = readl(base + BYTE_TEST);
- if(val != 0x87654321) {
- dev_err(dev, "no smc911x found on 0x%p (byte_test=0x%08x)\n",
- base, val);
- return -ENODEV;
- }
-
- val = readl(base + ID_REV) >> 16;
- for(i = 0; chip_ids[i].id != 0; i++) {
- if (chip_ids[i].id == val) break;
- }
- if (!chip_ids[i].id) {
- dev_err(dev, "Unknown chip ID %04x\n", val);
- return -ENODEV;
- }
-
- dev_info(dev, "detected %s controller\n", chip_ids[i].name);
-
- priv = xzalloc(sizeof(*priv));
- edev = &priv->edev;
- edev->priv = priv;
-
- edev->init = smc911x_init_dev;
- edev->open = smc911x_eth_open;
- edev->send = smc911x_eth_send;
- edev->recv = smc911x_eth_rx;
- edev->halt = smc911x_eth_halt;
- edev->get_ethaddr = smc911x_get_ethaddr;
- edev->set_ethaddr = smc911x_set_ethaddr;
- edev->parent = dev;
-
- priv->miidev.read = smc911x_phy_read;
- priv->miidev.write = smc911x_phy_write;
- priv->miidev.address = 1;
- priv->miidev.flags = 0;
- priv->miidev.edev = edev;
- priv->miidev.parent = dev;
- priv->base = base;
-
- smc911x_reset(edev);
- smc911x_phy_reset(edev);
-
- mii_register(&priv->miidev);
- eth_register(edev);
-
- return 0;
-}
-
-static struct driver_d smc911x_driver = {
- .name = "smc911x",
- .probe = smc911x_probe,
-};
-
-static int smc911x_init(void)
-{
- register_driver(&smc911x_driver);
- return 0;
-}
-
-device_initcall(smc911x_init);
--
1.7.10.4
More information about the barebox
mailing list