[PATCH 5/9] ARM: fix netx/MLO/s5p image build for pbl

[Jean-Christophe PLAGNIOL-VILLARD]

On 14:09 Sun 12 Aug     , Sascha Hauer wrote:
> On Sat, Aug 11, 2012 at 11:37:02AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 22:01 Fri 10 Aug     , Sascha Hauer wrote:
> > > If pbl support is enabled only zbarebox.bin was built, but
> > > not the SoC specific images. Fix this.
> > yeah it does the trick but I do not like the makefile target
> > we need to create cmd and use the $(call xxx,ifchanged) mecanism
> 
> Can do, but this would be subject to another patch. This patch only changes
> the dependencies, but not what is done.
agreed but as we touch it we really need to clean it
and do not add more as with the ln

Best Regards,
J.
> 
> Sascha
> 
> > 
> > Best Regards,
> > J.
> > > 
> > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > > ---
> > >  arch/arm/Makefile |   35 ++++++++++++++++++++++-------------
> > >  1 file changed, 22 insertions(+), 13 deletions(-)
> > > 
> > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > index 89f645b..63bc9be 100644
> > > --- a/arch/arm/Makefile
> > > +++ b/arch/arm/Makefile
> > > @@ -160,7 +160,16 @@ CPPFLAGS += -fdata-sections -ffunction-sections
> > >  LDFLAGS_barebox += -static --gc-sections
> > >  endif
> > >  
> > > -barebox.netx: barebox.bin
> > > +ifdef CONFIG_IMAGE_COMPRESSION
> > > +KBUILD_BINARY := arch/arm/pbl/zbarebox.bin
> > > +KBUILD_TARGET := zbarebox.bin
> > > +$(KBUILD_BINARY): $(KBUILD_TARGET)
> > > +else
> > > +KBUILD_BINARY := barebox.bin
> > > +KBUILD_TARGET := barebox.bin
> > > +endif
> > > +
> > > +barebox.netx: $(KBUILD_BINARY)
> > >  	$(Q)scripts/gen_netx_image -i $< -o barebox.netx		\
> > >  		--sdramctrl=$(CONFIG_NETX_SDRAM_CTRL)			\
> > >  		--sdramtimctrl=$(CONFIG_NETX_SDRAM_TIMING_CTRL)		\
> > > @@ -169,36 +178,36 @@ barebox.netx: barebox.bin
> > >  		--cookie=$(CONFIG_NETX_COOKIE);
> > >  
> > >  ifeq ($(machine-y),netx)
> > > -KBUILD_IMAGE := barebox.netx
> > > +KBUILD_TARGET := barebox.netx
> > > +KBUILD_BINARY := $(KBUILD_TARGET)
> > >  endif
> > >  
> > > -barebox.s5p: barebox.bin
> > > +barebox.s5p: $(KBUILD_BINARY)
> > >  	$(Q)scripts/s5p_cksum $< barebox.s5p
> > >  
> > >  ifeq ($(CONFIG_ARCH_S5PCxx),y)
> > > -KBUILD_IMAGE := barebox.s5p
> > > +KBUILD_TARGET := barebox.s5p
> > > +KBUILD_BINARY := $(KBUILD_TARGET)
> > >  endif
> > >  
> > > -MLO: barebox.bin
> > > +MLO: $(KBUILD_BINARY)
> > >  	@echo "  IFT    " $@
> > >  	$(Q)scripts/omap_signGP $< $(TEXT_BASE) 1
> > >  	$(Q)test -e $<.ift && mv $<.ift MLO
> > >  
> > >  ifeq ($(CONFIG_OMAP_BUILD_IFT),y)
> > > -KBUILD_IMAGE := MLO
> > > +KBUILD_TARGET := MLO
> > > +KBUILD_BINARY := $(KBUILD_TARGET)
> > >  endif
> > >  
> > > -barebox.ubl: barebox.bin
> > > +barebox.ubl: $(KBUILD_BINARY)
> > >  	@echo "  UBL    " $@
> > >  	$(Q)scripts/mkublheader $< > barebox.ubl
> > >  	$(Q)cat $< >> barebox.ubl
> > >  
> > >  ifeq ($(CONFIG_ARCH_DAVINCI),y)
> > > -KBUILD_IMAGE := barebox.ubl
> > > -endif
> > > -
> > > -ifdef CONFIG_IMAGE_COMPRESSION
> > > -KBUILD_IMAGE := zbarebox.bin
> > > +KBUILD_TARGET := barebox.ubl
> > > +KBUILD_BINARY := $(KBUILD_TARGET)
> > >  endif
> > >  
> > >  pbl := arch/arm/pbl
> > > @@ -208,7 +217,7 @@ zbarebox.S zbarebox.bin zbarebox: barebox.bin
> > >  archclean:
> > >  	$(MAKE) $(clean)=$(pbl)
> > >  
> > > -all: $(KBUILD_IMAGE)
> > > +all: $(KBUILD_BINARY)
> > >  
> > >  archprepare: maketools
> > >  maketools:
> > > -- 
> > > 1.7.10.4
> > > 
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |