[PATCH V2 0/4] ppc: Freescale TSEC driver
Sascha Hauer
s.hauer at pengutronix.de
Fri Aug 10 15:16:12 EDT 2012
On Tue, Aug 07, 2012 at 03:30:54PM +0100, Renaud Barbier wrote:
> The patchset v2 addresses the comments from version 1. 'printf' in the
> Ethernet driver are replaced by dev_dbg, dev_err or dev_info and excessive
> NULL checkings are removed. The platform Ethernet initialization is a
> generic architecture function (moved to mach-mpc85xx).
> Finally, the send function uses 'is_timeout' to wait for packet
> transmission but the send function still uses 2 descriptors as using only
> one fails.
>
> Renaud Barbier (4):
> ppc: GIANFAR base address definition
> net: GIANFAR driver
> fsl: Freescale TSEC specific initialization.
> ppc: P2020RDB Ethernet configuration
Applied, thanks
Sascha
>
> arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 14 +
> arch/ppc/configs/p2020rdb_defconfig | 6 +
> arch/ppc/mach-mpc85xx/Makefile | 1 +
> arch/ppc/mach-mpc85xx/eth-devices.c | 49 ++
> arch/ppc/mach-mpc85xx/include/mach/gianfar.h | 31 ++
> arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 7 +
> drivers/net/Kconfig | 5 +
> drivers/net/Makefile | 1 +
> drivers/net/gianfar.c | 548 +++++++++++++++++++++++
> drivers/net/gianfar.h | 284 ++++++++++++
> 10 files changed, 946 insertions(+), 0 deletions(-)
> create mode 100644 arch/ppc/mach-mpc85xx/eth-devices.c
> create mode 100644 arch/ppc/mach-mpc85xx/include/mach/gianfar.h
> create mode 100644 drivers/net/gianfar.c
> create mode 100644 drivers/net/gianfar.h
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list