[PATCH 11/12] at91: add Calao USB-A960 and USB-A9G20 C01 & C11 board support
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon Sep 19 08:15:48 EDT 2011
http://www.calao-systems.com
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/Makefile | 2 +
arch/arm/boards/usb-a926x/Makefile | 1 +
arch/arm/boards/usb-a926x/config.h | 6 +
arch/arm/boards/usb-a926x/env/config | 41 ++++++
arch/arm/boards/usb-a926x/init.c | 195 +++++++++++++++++++++++++++
arch/arm/configs/usb_a9260_defconfig | 58 ++++++++
arch/arm/configs/usb_a9g20_128mib_defconfig | 59 ++++++++
arch/arm/configs/usb_a9g20_defconfig | 58 ++++++++
arch/arm/mach-at91/Kconfig | 20 +++
9 files changed, 440 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boards/usb-a926x/Makefile
create mode 100644 arch/arm/boards/usb-a926x/config.h
create mode 100644 arch/arm/boards/usb-a926x/env/config
create mode 100644 arch/arm/boards/usb-a926x/init.c
create mode 100644 arch/arm/configs/usb_a9260_defconfig
create mode 100644 arch/arm/configs/usb_a9g20_128mib_defconfig
create mode 100644 arch/arm/configs/usb_a9g20_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f1c045e..f226575 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -105,6 +105,8 @@ board-$(CONFIG_MACH_FREESCALE_MX51_PDK) := freescale-mx51-pdk
board-$(CONFIG_MACH_FREESCALE_MX53_LOCO) := freescale-mx53-loco
board-$(CONFIG_MACH_GUF_CUPID) := guf-cupid
board-$(CONFIG_MACH_MINI2440) := mini2440
+board-$(CONFIG_MACH_USB_A9260) := usb-a926x
+board-$(CONFIG_MACH_USB_A9G20) := usb-a926x
board-$(CONFIG_MACH_VERSATILEPB) := versatile
board-$(CONFIG_MACH_TX25) := karo-tx25
diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/usb-a926x/config.h b/arch/arm/boards/usb-a926x/config.h
new file mode 100644
index 0000000..d971810
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/config.h
@@ -0,0 +1,6 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
+
+#endif /* __CONFIG_H */
diff --git a/arch/arm/boards/usb-a926x/env/config b/arch/arm/boards/usb-a926x/env/config
new file mode 100644
index 0000000..d77f678
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/env/config
@@ -0,0 +1,41 @@
+#!/bin/sh
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'nfs', 'tftp', 'nor' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nor', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root.$rootfs_type
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+#kernelimage_type=zimage
+#kernelimage=zImage
+kernelimage_type=uimage
+kernelimage=uImage
+#kernelimage_type=raw
+#kernelimage=Image
+#kernelimage_type=raw_lzo
+#kernelimage=Image.lzo
+
+nand_device=atmel_nand
+nand_parts="128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data)"
+rootfs_mtdblock_nand=5
+
+autoboot_timeout=3
+
+bootargs="console=ttyS0,115200"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
new file mode 100644
index 0000000..d09c2da
--- /dev/null
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <net.h>
+#include <init.h>
+#include <environment.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+#include <partition.h>
+#include <fs.h>
+#include <fcntl.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <nand.h>
+#include <sizes.h>
+#include <linux/mtd/nand.h>
+#include <linux/clk.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/sam9_smc.h>
+#include <gpio.h>
+#include <mach/io.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+
+static void usb_a9260_set_board_type(void)
+{
+ if (machine_is_usb_a9g20())
+ armlinux_set_architecture(MACH_TYPE_USB_A9G20);
+ else
+ armlinux_set_architecture(MACH_TYPE_USB_A9260);
+}
+
+static struct atmel_nand_data nand_pdata = {
+ .ale = 21,
+ .cle = 22,
+/* .det_pin = ... not connected */
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+};
+
+static struct sam9_smc_config usb_a9260_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static struct sam9_smc_config usb_a9g20_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 2,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+
+static void usb_a9260_add_device_nand(void)
+{
+ /* configure chip-select 3 (NAND) */
+ if (machine_is_usb_a9g20())
+ sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+ else
+ sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+
+ at91_add_device_nand(&nand_pdata);
+}
+
+static struct at91_ether_platform_data macb_pdata = {
+ .flags = AT91SAM_ETHER_RMII,
+ .phy_addr = 0,
+};
+
+static void usb_a9260_phy_reset(void)
+{
+ unsigned long rstc;
+ struct clk *clk = clk_get(NULL, "macb_clk");
+
+ clk_enable(clk);
+
+ at91_set_gpio_input(AT91_PIN_PA14, 0);
+ at91_set_gpio_input(AT91_PIN_PA15, 0);
+ at91_set_gpio_input(AT91_PIN_PA17, 0);
+ at91_set_gpio_input(AT91_PIN_PA25, 0);
+ at91_set_gpio_input(AT91_PIN_PA26, 0);
+ at91_set_gpio_input(AT91_PIN_PA28, 0);
+
+ rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+
+ /* Need to reset PHY -> 500ms reset */
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ (AT91_RSTC_ERSTL & (0x0d << 8)) |
+ AT91_RSTC_URSTEN);
+
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+ /* Wait for end hardware reset */
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+ /* Restore NRST value */
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ (rstc) |
+ AT91_RSTC_URSTEN);
+}
+
+#if defined(CONFIG_MCI_ATMEL)
+static struct atmel_mci_platform_data __initdata usb_a9260_mci_data = {
+ .bus_width = 4,
+};
+
+static void usb_a9260_add_device_mci(void)
+{
+ at91_add_device_mci(0, &usb_a9260_mci_data);
+}
+#else
+static void usb_a9260_add_device_mci(void) {}
+#endif
+
+static struct at91_usbh_data ek_usbh_data = {
+ .ports = 2,
+};
+
+static int usb_a9260_devices_init(void)
+{
+ usb_a9260_add_device_nand();
+ usb_a9260_phy_reset();
+ at91_add_device_eth(&macb_pdata);
+ usb_a9260_add_device_mci();
+ at91_add_device_usbh_ohci(&ek_usbh_data);
+
+#ifdef CONFIG_AT91_HAVE_SRAM_128M
+ at91_add_device_sdram(128 * 1024 * 1024);
+#else
+ at91_add_device_sdram(64 * 1024 * 1024);
+#endif
+ armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
+ usb_a9260_set_board_type();
+
+ devfs_add_partition("nand0", 0x00000, SZ_128K, PARTITION_FIXED, "at91bootstrap_raw");
+ dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap");
+ devfs_add_partition("nand0", SZ_128K, SZ_256K, PARTITION_FIXED, "self_raw");
+ dev_add_bb_dev("self_raw", "self0");
+ devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, PARTITION_FIXED, "env_raw");
+ dev_add_bb_dev("env_raw", "env0");
+ devfs_add_partition("nand0", SZ_512K, SZ_128K, PARTITION_FIXED, "env_raw1");
+ dev_add_bb_dev("env_raw1", "env1");
+
+ return 0;
+}
+device_initcall(usb_a9260_devices_init);
+
+static int usb_a9260_console_init(void)
+{
+ at91_register_uart(0, 0);
+ return 0;
+}
+console_initcall(usb_a9260_console_init);
diff --git a/arch/arm/configs/usb_a9260_defconfig b/arch/arm/configs/usb_a9260_defconfig
new file mode 100644
index 0000000..adcb603
--- /dev/null
+++ b/arch/arm/configs/usb_a9260_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="USB-9G20:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_PROMPT_HUSH_PS2="y"
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_MACB=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/configs/usb_a9g20_128mib_defconfig b/arch/arm/configs/usb_a9g20_128mib_defconfig
new file mode 100644
index 0000000..3c0e6f7
--- /dev/null
+++ b/arch/arm/configs/usb_a9g20_128mib_defconfig
@@ -0,0 +1,59 @@
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_AEABI=y
+CONFIG_AT91_HAVE_SRAM_128M=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="USB-9G20:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_PROMPT_HUSH_PS2="y"
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_MACB=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
new file mode 100644
index 0000000..2bcb8eb
--- /dev/null
+++ b/arch/arm/configs/usb_a9g20_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="USB-9G20:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_PROMPT_HUSH_PS2="y"
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/usb-a926x/env"
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_MTEST_ALTERNATIVE=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_BOOTM_ZLIB=y
+CONFIG_CMD_BOOTM_BZLIB=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_GPIO=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_NFS=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_NET_TFTP_PUSH=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_RESOLV=y
+CONFIG_DRIVER_NET_MACB=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_UBI=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index ee46002..b53b1c4 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -14,6 +14,8 @@ config BOARDINFO
default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
default "Atmel at91sam9m10g45-ek" if MACH_AT91SAM9M10G45EK
default "Bucyrus MMC-CPU" if MACH_MMCCPU
+ default "Calao USB-A9260" if MACH_USB_A9260
+ default "Calao USB-A9G20" if MACH_USB_A9G20
default "Ronetix PM9261" if MACH_PM9261
default "Ronetix PM9263" if MACH_PM9263
default "Ronetix PM9G45" if MACH_PM9G45
@@ -96,6 +98,12 @@ config MACH_AT91SAM9260EK
help
Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board
+config MACH_USB_A9260
+ bool "CALAO USB-A9260"
+ help
+ Select this if you are using a Calao Systems USB-A9260.
+ <http://www.calao-systems.com>
+
endchoice
endif
@@ -160,6 +168,12 @@ config MACH_AT91SAM9G20EK
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
endchoice
endif
@@ -234,6 +248,12 @@ config AT91_HAVE_2MMC
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
+config AT91_HAVE_SRAM_128M
+ bool "Have 128 of ram"
+ depends on MACH_USB_A9G20
+ help
+ Select this if you board have 128 MiB of Ram (as USB_A9G20 C11)
+
choice
prompt "LCD type"
depends on MACH_AT91SAM9M10G45EK
--
1.7.5.4
More information about the barebox
mailing list